Go Back   OC3D Forums > [OC3D] Hardware & Software > New Build Advice
Reply
 
Thread Tools Search this Thread Display Modes
 
  #1  
Old 27-05-11, 03:34 PM
Awoozl Awoozl is offline
Newbie
 
Join Date: Aug 2010
Posts: 28
Hey guys,

I finally got all the parts for my new rig and now I'm having trouble getting it to run. I installed Win 7 pro x64 from an usb stick, but when the PC reboots after the installation and tries to finish it, I get a BSOD that goes by too fast to read it. After that whenever I try to reboot back to Windows, I get and error saying:

The computer restarted unexpectedly or encountered an unexpected error. windows installation cannot proceed. To install windows click OK or restart the computer then restart the installation.

I've tried to reinstall Win7 coupla times now, both times I got the same result. Also before getting my SSD (which I'm using for the OS) I tried running my old HDD on the rig. It booted up nicely the first time, but after that I got BSOD's everytime Windows started.

So at this point I'm thinking something is broken, but I don't know what. Any suggestions on what to do?

Parts used:

Sabertooth x58 (with the latest BIOS)

Corsair Dominator 6GB

Intel i7 960

GTX 570 Phantom

Noctua NH-D14

OCZ Agility 3 SSD

Corsair AX 750

Reply With Quote
  #2  
Old 27-05-11, 03:37 PM
SieB's Avatar
SieB SieB is offline
OC3D Elite
 
Join Date: Jan 2011
Location: Dudley
Posts: 8,138
Did you remove the USB when the install restarts for the first time because if you leave it in it will cause problems.
__________________
NZXT Switch 810 - Ryzeny 3600 - Gigabyte X570 Gaming - 32GB Corsair Platinum SE - MSI Gaming 1070 - Crucial MX100 256GB SSD - Crucial MX500 500GB SSD - Samsung F3 1TB HDD - Corsair H100 - Corsair RM1000i SE - Asus VE247H

PC Audio: Asus Xonar STX - Sennheiser HD650.
Portable Audio: FiiO X3II - Audiofly AF140 - Etymotic ER4s - Fidue A83.
Reply With Quote
  #3  
Old 27-05-11, 03:51 PM
Awoozl Awoozl is offline
Newbie
 
Join Date: Aug 2010
Posts: 28
I did not. Lemme try that.
Reply With Quote
  #4  
Old 27-05-11, 04:25 PM
Awoozl Awoozl is offline
Newbie
 
Join Date: Aug 2010
Posts: 28
OK this time I got a BSOD during the installation:



The system encountered an uncorrectable hardware error.

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

Technical Information:

*** STOP: 0x00000124


This is the same error I kept getting with the old HDD, that is currently working on the PC I'm using atm. Any ideas?
Reply With Quote
  #5  
Old 27-05-11, 04:42 PM
S_I_N's Avatar
S_I_N S_I_N is offline
OC3D Elite
 
Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 4,635
not sure if this will help or related. But I had a similar issue doing a XP install on my lil ones rig. Finally got around to googling the stop code and it turned out since I upgraded the rig I needed to slipstream sp2 into the install. And it worked perfectly. I googled ur stop issue and it came back as instability so I might suggest you put it to stock (assuming you have it oc'd atm) and see what happens.
__________________


Intel 7700K
Aorus Z270 Gaming K7
2x8GB GSKILL Trident Z 3200MHz
Intel SSD6 256Gb x2 in Raid 0
Samsung 850 EVO 1TB
EVGA GTX1080 FTW2 iCX Heat Killer IV block
Custom water Cooled Hardware Labs GTS360/240
ThermalTake Grand RGB 1000w PSU
Corsair Crystal 570X

Reply With Quote
  #6  
Old 27-05-11, 04:54 PM
Awoozl Awoozl is offline
Newbie
 
Join Date: Aug 2010
Posts: 28
Haven't touched the clocking on any of it yet as I haven't even got it to boot to Windows properly yet.
Reply With Quote
  #7  
Old 27-05-11, 04:58 PM
S_I_N's Avatar
S_I_N S_I_N is offline
OC3D Elite
 
Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 4,635
The 0x00000124 error is the Hexadecimal format of the error caused. This is common error code format used by windows and other windows compatible software and driver vendors.

This code is used by the vendor to identify the error caused. This 0x00000124 error code has a numeric error number and a technical description. In some cases the error may have more parameters in 0x00000124 format .This additional hexadecimal code are the address of the memory locations where the instruction(s) was loaded at the time of the error.

what if anything is after the stop error code???

do you have windows on cd??? have ya tried installing that way??? just some thoughts
__________________


Intel 7700K
Aorus Z270 Gaming K7
2x8GB GSKILL Trident Z 3200MHz
Intel SSD6 256Gb x2 in Raid 0
Samsung 850 EVO 1TB
EVGA GTX1080 FTW2 iCX Heat Killer IV block
Custom water Cooled Hardware Labs GTS360/240
ThermalTake Grand RGB 1000w PSU
Corsair Crystal 570X

Reply With Quote
  #8  
Old 27-05-11, 07:43 PM
Awoozl Awoozl is offline
Newbie
 
Join Date: Aug 2010
Posts: 28
Stuck the SSD to this PC, managed to install Windows from a CD with no problem. Booted it up, everything was working as it should.

So I tried it again with the new PC, and got the same BSOD right after logon. After that it just kept rebooting without even showing the BSOD. Went too fast again. Wasn't able to catch the hexadecimals at the end.
Reply With Quote
  #9  
Old 27-05-11, 07:55 PM
S_I_N's Avatar
S_I_N S_I_N is offline
OC3D Elite
 
Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 4,635
ok now time to trouble shoot try one stick of ram at a time singly at first and watch for bsod if it does it with each stick then try another slot if that continues you have bad memory most likely this is going to be a long process of trouble shooting so be patient and in the end you'll know whats what
__________________


Intel 7700K
Aorus Z270 Gaming K7
2x8GB GSKILL Trident Z 3200MHz
Intel SSD6 256Gb x2 in Raid 0
Samsung 850 EVO 1TB
EVGA GTX1080 FTW2 iCX Heat Killer IV block
Custom water Cooled Hardware Labs GTS360/240
ThermalTake Grand RGB 1000w PSU
Corsair Crystal 570X

Reply With Quote
  #10  
Old 27-05-11, 09:06 PM
SmoulderingCircuits SmoulderingCircuits is offline
OC3D Elite
 
Join Date: Dec 2010
Posts: 2,655
Take a photo when it BSODs
__________________


Subroutine
Lubuntu 12.10 | 2880x1024 | AMD E-350

Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump










All times are GMT. The time now is 02:45 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.