Just a little bit thinner. (CM World Series 2017) ZenModz

ZenModz

New member
l8Fzwdr.jpg






Hello Again :)


I had not planed on doing a second build for the world series but I still have time for something small. I have been thinking about doing a small form build for some time

and i've been wanting to do a white build as well, so for this build im looking at doing a build in white and making it slim.


I Will be using a Master Case Maker 5 and a Cosmos SE


WvRnxrr.jpg


6DSh5Gj.jpg


De-construccion have begun, lots of cutting still to go to get that "SLIM" look and the MIG waiting to put it all back together again.


Y1w9FHa.jpg







Quick layout of parts from both cases.

SP6Vhze.jpg






And a way to put it all back together again, Oh what fun this will be!

Some steel may be injured in this process :thumb:

9tqsi8f.jpg



So Far what i'm doing is im trying to reuse as many parts as I can from both cases. The MoBo tray has been centered in the case to have even room on both sides,

The back side being for the cooling and cabling, Giving me 80mm at the back and 80mm on the MoBo side and a 160mm all up. More then enough space to get things done.



km21eRJ.jpg



zr50LUU.jpg



F77DkW0.jpg



DPUJery.jpg



Wz5niyB.jpg



UyXTaAT.jpg



GboVhT3.jpg


Thanks again for stopping by.
 
Update on the Thinner build, Case frame is now reshaped. The back of the case now has room for 2x360 rads for the cooling the GPU & CPU. And in side the MaterWatt Maker 1200 PSU. Still lots more to come and still lots more to do.


7gChfCk.jpg


ZPOkDVS.jpg


8u9pqVT.jpg
 
Thanks Bartacus, :)


Some of the very COOL hardware going into the Thinner case.


MAXIMUS VIII HERO ALPHA MoBo W/block, From Bitspower.

vXZ5ZgH.jpg




ASUS STRIX 980ti And Bitspower RBG W/Block.
bZXpgbd.jpg



OszP2Lt.jpg
 
Time again to show some pic's.

From one case to the next I have used the rear GPU mount from the Cosmos SE cut it out reshaped it to fit in the top of the frame to hold the GPU in place. Plus one new clear and black printed GPU logo, For some back light RBG.

9iJCMq6.jpg


9pprgBp.jpg


Z9JM8D1.jpg


0eLgbL7.jpg


W58ti6z.jpg
 
That's awesome. The water cooling fittings on the mobo look like they should be the cassette hubs for Awesome Mix Vol 2.
 
Nope thought you'd get the joke!


Oh ! did :p But I still had to ask :D

Wait.. Did you paint those pieces? or are they printed/cut out?


I re-desined them in photoshop to fit the blocks. and happen to have a Roland printer that prints silver white and color. and printed then on to thin clear plastic sheet. I can airbrush but im still not that good and it would take to long. mind you it still took a long time to get them to fit and look good. :)
 
Last edited by a moderator:
Back
Top