OC3D Forums

OC3D Forums (https://forum.overclock3d.net/index.php)
-   Storage Mediums (https://forum.overclock3d.net/forumdisplay.php?f=27)
-   -   NVME Boot on Z77 (https://forum.overclock3d.net/showthread.php?t=94769)

Kleptobot 16-06-20 01:59 AM

NVME Boot on Z77
Hi All, not sure if people will care as this is fairly old news and has been covered before.
But thought i would chronicle my experience here so other people with similar hardware can know it works.

I recently modded the BIOS of an asus maximus gene V to support booting from pcie NVME drives. The base version i modded was 1903 which is the latest available from asus for that board.

I did not pioneer this and just used already available information, but i can confirm it works.

The board does not come with any m.2 ports so i had to use an adapter card. And to get it to work i had to disable CSM in the BIOS.

The adapter card was a SilverStone ECM25
And the drive was an ADATA XPG SX8200 Pro 1TB

This is now the only drive installed in the system with no other workarounds needed.

EDIT: I just realised i posted this in the wrong section, can it please be moved

All times are GMT. The time now is 09:27 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.