Hi all,
So far i have managed to buy the following below for my new build. I will post pics of all the products and the build following. Unfortunately i wont be able to finalize my build until the 5850 delivers (30th December!)
I would also be grateful if anyone could give some input on my build e.g. location of parts, water flow ect...
As this is my first real expensive build (also my first dual loop) i would like to get it right and i hope i can rely on my fellow OC3D members for help
Parts List
Hardware:
Mobo - Asus P6T SE
CPU - i7 D0
RAM - Corsair Dominator 3GB 1600Mhz (Soon 2 b 6GB)
Case - CoolerMaster ATCS 840
GPU - Asus ATI 5850 1GB(Not Arrived)
PSU - CoolerMaster Real power 1000w
Hdd - (Using HDD's From Previous build)
Liquid Cooling Parts:
Pumps - D5 Vario ( Broken Vario!) and DDC With XPSC Res Top
Tubing - XPSC Black 1/2" ID(Not Arrived)
Coils - White PrimoChill Anti-Kink Coils 3/8"
Rads - Black Ice Stealth GT 360mm and 120mm and Swiftech MCR240 240mm
W/b - EK FC5850 - Acetel and EK Supreme Plexi W/B
Res - XSPC Bay Reservoir - Black
Fans - 4 Yate Loon 2200RPM 88CFM(Not Arrived) fans and 3 Xilence Pro 120mm
Clips - (Pack Of 20)Zinc Plated Jubilee Wormdrive Clip 3/4"
Barbs - 6 EK Barbs And 8 1/4" BSPP - 1/2" Highflow Hose Tail
Liquid - 2x Feser Aqua - Ultra Pure Distilled Water And 2x silver coil (Not Arrived)
Miscellaneous Parts:
Tubing Cutter ( For that Professional look! )
EK Back plate And Mounting Plate 1366
Articlean Contact base cleaner
Nesteq FanMax 8-Channel Fan Controller Black(Not Arrived)
HFC-Free Air Duster(Not Arrived)
Arctic Cooling MX-2(Not Arrived)
I Think That's It All! I Will Constantly Update This Thread With Pics And Progress.
Any Comments Welcome (Bad or/and Good)
Thanks For Viewing!
Oh b4 i 4get, Would it be possible 4 me to put my 8800gtx card in my build as a dedicated physx card. and also the pros n cons. Thanks!
So far i have managed to buy the following below for my new build. I will post pics of all the products and the build following. Unfortunately i wont be able to finalize my build until the 5850 delivers (30th December!)
I would also be grateful if anyone could give some input on my build e.g. location of parts, water flow ect...
As this is my first real expensive build (also my first dual loop) i would like to get it right and i hope i can rely on my fellow OC3D members for help
Parts List
Hardware:
Mobo - Asus P6T SE
CPU - i7 D0
RAM - Corsair Dominator 3GB 1600Mhz (Soon 2 b 6GB)
Case - CoolerMaster ATCS 840
GPU - Asus ATI 5850 1GB(Not Arrived)
PSU - CoolerMaster Real power 1000w
Hdd - (Using HDD's From Previous build)
Liquid Cooling Parts:
Pumps - D5 Vario ( Broken Vario!) and DDC With XPSC Res Top
Tubing - XPSC Black 1/2" ID(Not Arrived)
Coils - White PrimoChill Anti-Kink Coils 3/8"
Rads - Black Ice Stealth GT 360mm and 120mm and Swiftech MCR240 240mm
W/b - EK FC5850 - Acetel and EK Supreme Plexi W/B
Res - XSPC Bay Reservoir - Black
Fans - 4 Yate Loon 2200RPM 88CFM(Not Arrived) fans and 3 Xilence Pro 120mm
Clips - (Pack Of 20)Zinc Plated Jubilee Wormdrive Clip 3/4"
Barbs - 6 EK Barbs And 8 1/4" BSPP - 1/2" Highflow Hose Tail
Liquid - 2x Feser Aqua - Ultra Pure Distilled Water And 2x silver coil (Not Arrived)
Miscellaneous Parts:
Tubing Cutter ( For that Professional look! )
EK Back plate And Mounting Plate 1366
Articlean Contact base cleaner
Nesteq FanMax 8-Channel Fan Controller Black(Not Arrived)
HFC-Free Air Duster(Not Arrived)
Arctic Cooling MX-2(Not Arrived)
I Think That's It All! I Will Constantly Update This Thread With Pics And Progress.
Any Comments Welcome (Bad or/and Good)
Thanks For Viewing!
Oh b4 i 4get, Would it be possible 4 me to put my 8800gtx card in my build as a dedicated physx card. and also the pros n cons. Thanks!
