iloveamd64
New member
wats the tightest timings for corsair xms drr500(the one with all the leds on)? the stock timings are 3-4-4-8
wats the tightest timings for...
- Thread starter iloveamd64
- Start date
iloveamd64
New member
just got 2.5-3-4-6 any good?
iloveamd , the general rule when loosening or tightening the ram timings work as
2,3,3,6
2.5,3,3,6
2.5,4,3,6
2.5,4,4,8
3,4,4,8
have a higher Trp value of 4 , while having a lower Trcd value of 3 will not help much. If you cant get 2.5-3-3-6 , then try 2.5-4-3-6 . Loosen your Trcd value first.
2,3,3,6
2.5,3,3,6
2.5,4,3,6
2.5,4,4,8
3,4,4,8
have a higher Trp value of 4 , while having a lower Trcd value of 3 will not help much. If you cant get 2.5-3-3-6 , then try 2.5-4-3-6 . Loosen your Trcd value first.
FarFarAway
New member
name='PV5150' said:Great helpful info Bourne, reppies for you m8
That is great help once again |3ourne! Repped as appropriate!
bloodthirst
New member
|3ourne said:
bourne now's his stuff lol
thank you all for soo many reppies .
but just trying to help someone
Although knowing that your ram has hynix chips , I would say you wont get much speed out of them till you relax the timings to around 2.5-4-4-8 or 3-4-4-8 . Hynix is happy running at higher clock speeds but wants looser timings.
. but just trying to help someone
Although knowing that your ram has hynix chips , I would say you wont get much speed out of them till you relax the timings to around 2.5-4-4-8 or 3-4-4-8 . Hynix is happy running at higher clock speeds but wants looser timings.
