watercooling ideas

[crazy_g1zm0]

come xmas which is soonish i will be going throught a fairly major upgrade i hope which will be form my current old p4 based system to a brand new e6300 core system and i will be getting watercooling for it.

I dont know much about watercooling so i have been looking round and have found it more cost effective to import from germany here is an idea of the parts i was thinking about what do you all think about them?

gpu

http://www.aqua-computer-systeme.de/shopsystem/product_info.php?cPath=7_10_12&products_id=92&osCsid=9fc3b4411773f72792545031a60f040c

res

http://www.aqua-computer-systeme.de/shopsystem/product_info.php?cPath=7_180_181&products_id=1098&osCsid=9fc3b4411773f72792545031a60f040c

cpu

http://www.aqua-computer-systeme.de/shopsystem/product_info.php?cPath=7_10_11&products_id=74&osCsid=9fc3b4411773f72792545031a60f040c

RAD

http://www.aqua-computer-systeme.de/shopsystem/product_info.php?cPath=7_183_184&products_id=1550&osCsid=6afb608b888137d6e6727fd4563d6df7

Pump

http://www.aqua-computer-systeme.de/shopsystem/product_info.php?products_id=1138&osCsid=6afb608b888137d6e6727fd4563d6df7

this is only an idea so any suggestions are welcome but i am on a budget of 150 ish

peter

 

[stocky]

Looks good

I don't know if I would take the Aqua Computer route being the smaller ID, although they do seem quite popular - and seem to be becoming more so all the time.

How come you've chosen the 6300 over the 6600 which performs better due to the greater cache?

Also, I don't know if you should post a competitor site - even though it is abroad!

 

[crazy_g1zm0]

the reason is i cant afford the other chip as i have little money. also i iwll be using loarger bore barbs with the parts to allow greater flow

 

[Phil Stanbridge]

Aqua Computer feature heavily in my new "uber" systems because it oozes quality. It's primarily aimed at the low flow side of things, but providing the loop isnt too complicated it provides very impressive and consistant temps.

If you're looking at a Aqua setup come to me, I can provide you with all the parts you require.

 

[maverik-sg1]

You can purchase all your aqua needs right here @ www.ep-uk.co.uk - just email sales@extremeprometeia.com with your requirements, most products stocked, non-stocked items usually delivered within days.

The reason why smaller boare has become more populer is the pumps that are available to us now provide more pressure, thus the smaller bore restrictions are offste by the power of the pump.

 

[stocky]

the reason is i cant afford the other chip as i have little money. also i iwll be using loarger bore barbs with the parts to allow greater flow

By Christmas time the prices should have fallen by a fair bit, the E6600 is available for just over the £200 mark at the mo - I expect this to be much less by then

 

[crazy_g1zm0]

well the loop is going to be:

rad-cpu-res-pump-gpu-rad ect so a fairly simple loop overall but will eventually upgrade it to 2nd gpu and mabe teh chipset and ram also but that is a possbility. also how much will it cost form you for that setup as i am on a budget of 150 roughly.