Watercooled BitFenix Colossus Project Finished

[Firat]

All Finished just some fine tuning left

Specs :

- Z68-UD7 mobo

- 2600K

- OCZ Vertex 3 120GB

- 8gb dominaters with blue fins (1600 at 8-8-8-24)

- creative titanium hd soundcard

- gainward gtx570 pahntom graphics card

- ax850w psu

- water cooling (cpu only)

- xspc rx 240 rad with push pull sickleflow fans (blue)

- xspc dual bay res pump (750)

- feser one fluid (blue)

- ek supreme hf nikel plexi block

- tygon tubing (7/16) with bitspower fittings

all in my beatiful collossus (i also purchased the retail window side panel aswell...

Here are my load of progress photos i tried to take:

Heres my stable 24/7 OC

1.392 V on load and 1.368 Idle

Temps

core 1 = 61

core 2 = 70

core 3 = 67

core 4 = 64

Well thats my 1st watercooling setup done and dusted

just trying to overclock now, will get back to you all when i have managed a stable overclocked, thats when ill tell you temps and such

UPDATE!!!

Changed the Pump and Res..........

4.8ghz OC at 1.392v at load and 1.380v at idle.....load temps after 45min prime = 63c

 

[tinytomlogan]

Looking good dudio

 

[chudley]

NIce setup, How are you finding the case?

 

[Firat]

NIce setup, How are you finding the case?

This case is amazing, inside and outside, cable management is a breeze with this case, lots of space for anything you have to put in, comes with 2 big (230mm) silent fans and also if you put 2 decent fans like i have you'll get good airflow aswell

 

[Dark NighT]

Looking Good!

 

[Firat]

 

[noexe]

Good work fella looks top !

 

[Firat]

 

[INMATE183]

I realy dont like these cases...love the spec tho man good work

 

[bobkelso]

Me likey, good work looking nice.

 

[Firat]

Thanks dude

 

[Hay11Mac]

Nice rig fella

 

[Qubo420]

Beautiful rig man.

 

[Firat]

Thanks dudes and dudettes

 

[stevenwright6379]

was going to bitch about the ram not looking good on that board but then noticed the massive noctua cooler covers them up

does look awesome though

 

[Firat]

hey everyone i just chucked in 2 more 2gb sticks of mushkin redline ram and i overclocked the 4 stickes at 2133 at 10-10-10-26!!!!!!!!!!!!! STABLE

sisoft benchmark at 27000MB/s and latency of 51ns

and tom said it wasnt possible

 

[killablade]

hey everyone i just chucked in 2 more 2gb sticks of mushkin redline ram and i overclocked the 4 stickes at 2133 at 10-10-10-24!!!!!!!!!!!!! STABLE

sisoft benchmark at 27000MB/s and latency of 51ns

and tom said it wasnt possible

If anything he said it wasn't possible with HIS sticks

 

[rrplay]

I was really surprised to see how effective the cable management is on these cases.The more I look at the Bit-Fenix line the more I like them.

Thanks for posting and sharing your rig & really like what you did with that ram OC way to GO !

 

[BARRYWB]

Hey Guys,

I have Finally Completed My Rig

Specs Are As Follows;

-Core i5 2500k OC'd to 4.7Ghz at 1.325V

-Mushking Redline Ridgeback Ram 2 x 2GB (6-8-6-24 1600Mhz) OC'd to 1833Mhz at 7-9-7-24 Timmings

EDIT*

i chucked in 2 more 2gb sticks of mushkin redline ram and i overclocked the 4 stickes at 2133 at 10-10-10-26!!!!!!!!!!!!!

-HD6850 Toxic Sapphire 820Mhz OC'd to 900Mhz (will go up to 1000Mhz but Didn't need it) at 1.00V (heaven Benmchmark Gave a 808 result reading, Max temp 75'c)

-MSI P67A-GD65 Mobo

-NH-D14 Cooler

-Corsair HX750W PSU

-Kingston V100 64GB SSD

-1TB Samsung F3

-Samsung Blu Ray Drive

2 x NF-P14 Fan's

Below are some pictures of the RIG

The Following 5 picture are some screen shots I took during tests

Now the Rig's Exterior

Now the Rig's Interior

What do you guy's Think?

 

[BARRYWB]

Nice one, looks as though you have put a load of work into it?

Only wish our Hospitals looked so clean.