Water Blocks for Sapphire 7970 oc.....
- Thread starter Briggsy
- Start date
FTR.4500MHz
New member
do you own these cards ?
If so the EK-FC 7970 block will fit on them !
If so the EK-FC 7970 block will fit on them !
FTR.4500MHz
New member
Then get The EK Blocks , since the saphire cards are ref. models just with a custom cooler slaped on .
Or any other reference block , depends on your taste mate .
Or any other reference block , depends on your taste mate .
FTR.4500MHz
New member
I wouldnt go for a kit if you plan to cool cpu+gpu , custom is the way to go !!!
Kits are only good for a cpu loop imo .
Kits are only good for a cpu loop imo .
FTR.4500MHz
New member
Depends on your budget mate !
If you have enough to spend you can pick the rolls royce of WC components !
If you have enough to spend you can pick the rolls royce of WC components !
SieB
New member
Is this for CPU and GPUs or just your GPUs?
If it's CPU and GPUs go with a 60mm thick 360mm rad in the roof and a 60mm thick 240mm rad in the bottom, for GPUs only one 360 in the roof will do. Either the XSPC RX, Phobya G.Charger or Alphacool UT60 rads would be right for the job.
This kit would be perfect for your CPU, comes with everything you need except Coolant. You just need to add 2x GPU blocks, a 240 rad and four more fittings to be able to do your GPUs as well.
http://www.specialte...-pid-15994.html
I'd get some better fans than the ones it comes with though because they aren't very good, something like the Scythe GTs 1850rpm or the new Noctua NF12s.
If it's CPU and GPUs go with a 60mm thick 360mm rad in the roof and a 60mm thick 240mm rad in the bottom, for GPUs only one 360 in the roof will do. Either the XSPC RX, Phobya G.Charger or Alphacool UT60 rads would be right for the job.
This kit would be perfect for your CPU, comes with everything you need except Coolant. You just need to add 2x GPU blocks, a 240 rad and four more fittings to be able to do your GPUs as well.
http://www.specialte...-pid-15994.html
I'd get some better fans than the ones it comes with though because they aren't very good, something like the Scythe GTs 1850rpm or the new Noctua NF12s.
SieB
New member
Yeah, the Switch can hold two rads easy a 360 in the roof and a 240 in the bottom will fit strait in, no messing around.
Unfortunately there are no kits for GPU only loops but if you buy
RX360 kit
http://www.specialte...-pid-15994.html
RX240 rad
-58-OD-Tubing--Black-Chrome-pid-12869.htm
http://www.specialte...0-pid-7874.html
you will need x2 of these fittings to go with it
http://www.specialtech.co.uk/spshop/customer/XSPC-14-Thread-Compression-Fitting-for-716-ID--
X2 of the EK 7970 blocks
http://www.specialte...-pid-15062.html
That would be every thing you needed apart from fans, coolant and the extra fittings you need for the GPU.
I'm not sure about what fittings you will need for the GPU block someone else who has done theirs might be able to help you more with that.
Unfortunately there are no kits for GPU only loops but if you buy
RX360 kit
http://www.specialte...-pid-15994.html
RX240 rad
-58-OD-Tubing--Black-Chrome-pid-12869.htm
http://www.specialte...0-pid-7874.html
you will need x2 of these fittings to go with it
http://www.specialtech.co.uk/spshop/customer/XSPC-14-Thread-Compression-Fitting-for-716-ID--
X2 of the EK 7970 blocks
http://www.specialte...-pid-15062.html
That would be every thing you needed apart from fans, coolant and the extra fittings you need for the GPU.
I'm not sure about what fittings you will need for the GPU block someone else who has done theirs might be able to help you more with that.
