Want to OverClock To 3.6Ghz

[JOSE T]

I when out and got me a >>>

Q6600 GO - 2.4GHZ VID 1.28v

SILENCER 610W Power Supply

EVGA 9800 GTX+ 512MB

Sunbeam Tuniq Tower 120

4 * 2gb DDR2 1066Mhz PC2 - 8500 C5 CORSAIR DOMINATOR

ALL THIS IS GOING IN TO THIS CASE

 

[zak4994]

Do you know the basics?

Make sure you have enough voltage running through.

That should keep you busy for a bit.

Welcome btw!

 

[Luigi]

Try around 1.45v on the CPU. you will also need to put other volts such as PLL up.

 

[JOSE T]

Try around 1.45v on the CPU. you will also need to put other volts such as PLL up.

ok let's try that

 

[tinytomlogan]

And set the ram and the boot strap manualy.

Also watch the temps, you must stress test for afew hours to see what your temps go up too, anything above 60c and you need better cooling or less volts.

 

[JOSE T]

And set the ram and the boot strap manualy.

Also watch the temps, you must stress test for afew hours to see what your temps go up too, anything above 60c and you need better cooling or less volts.

After playing around whit the Bios trying to overclock The Q6600 Go CPU:yumyum: to 3.6GHZ:drool: i keep on getting 64 65 64 65 that's not good at all:ban:, so then i try a new setting but windows don't boot at all,

so here are these settings im talking about let me know what to do P.S

 

[JOSE T]

Any body?

 

[Hatman]

3.6may just be out of reach. Up the vcore to 1.45 and if that cant get it to boot stable you may have to aim for a lower clock speed.

 

[tinytomlogan]

MCH (northbridge) needs to go up aswell.

Those temps are too high mate. You might not be able to get 3.6 with that cooler.

Id go for 3.4 with lower volts tbh.

 

[JOSE T]

MCH (northbridge) needs to go up aswell.

Those temps are too high mate. You might not be able to get 3.6 with that cooler.

Id go for 3.4 with lower volts tbh.

is not the cooler is me. i just have to set it whit low temps:yumyum:

by the way

i have EVEREST Ultimate Edition is this good

 

[n3xT]

I must put 1.51V on the nb to pass linpack test with my old Q6600 @ 8x450

just test it !

 

[JOSE T]

I must put 1.51V on the nb to pass linpack test with my old Q6600 @ 8x450

just test it !

i still can't get a good setting for 3.6ghz

OK DO ANYBODY HAVE A GOOD SETTING FOR 3.2GHZ?

 

[tinytomlogan]

Mate you dont just get good settings.

Read the guides and work up slowly. you are just trying to do to much too quick when you dont understand enough about what you are doing.

If you read the guides and more importantly take your time rather than just ****ing volts up you will learn and understand your machine better.

 

[JOSE T]

Mate you dont just get good settings.

Read the guides and work up slowly. you are just trying to do to much too quick when you dont understand enough about what you are doing.

If you read the guides and more importantly take your time rather than just ****ing volts up you will learn and understand your machine better.

i did some reading and some Googleing, i overclock it to 3.5 boots up i runed a test for 2Hr here are my team.

what do you guy's Think?

 

[Ducky Spud]

leave it running prime95 or similar tests overnight, Ive heard a few people say they like to leave it at least 8- 10 hours. If it survives that long its probably going to be pretty stable I'd guess. 3.5Ghz is a pretty good improvment too, nice work

 

[JOSE T]

leave it running prime95 or similar tests overnight, Ive heard a few people say they like to leave it at least 8- 10 hours. If it survives that long its probably going to be pretty stable I'd guess. 3.5Ghz is a pretty good improvment too, nice work

yea 3.5ghz :nono:was just a lil bit to hot for me i down it to 3.4ghz and im happy whit iy lol:worship:

 

[Freak]

Try it at 3.5 and stick the volts down a notch

 

[Brooksie]

I can't get 3.6 stable on air, but 3.3ghz is fine for me (not now as my mobo is packing up but it was )

i've got a pretty high VID on my chip anyway (at least I think)