[Unnamed] Lian Li PC V2010

The Orange One said:
I Think Getting another PMP450 IS best
Click to expand...

So getting another PMP450 with either the dual D5 EK top or Bitspower top? That would be without mod kits, or continue to use my single pump with a mod kit and pump top? Will I see any benefit from using two pumps?


wassupdoc said:
Can't say enough good things about the phobya G-14s :P
Click to expand...

Yeah, they look very good. I may just have to change the build to red ;)
I may as well seeing as though Nuclear Fission is green and blue, and Blue Dawn is blue and grey, so I should change it up a bit :lol:
 
The Orange One said:
With Using Two Pumps, It Makes sure that if One Pump Breaks, you will still have 1 pump to keep the Rig Cool
Click to expand...

Is there any other benefit? Like, the system will be running two GPU's and a CPU with 2 rads and a fair amount of cooling. Also perhaps motherboard waterblocks.
 
Two pumps does, indeed, help when you have a lot of waterblocks etc. as the pressure is increased.
Edit: A little more research later, and I have learned there are two ways of doing things. 1) having the pumps in paralel - this increases the flow rate. 2) having the pumps in series - this increases the pressurs.
Or at least, that's what i've picked up from the interwebs.
 
Last edited:
Just ordered a heap of tubing, fittings, CPU block, etc from Hellfire Toyz. Ended up going with UV Blue Masterkleer tubing with all black fittings. I am also going to replace the aluminium mid bracket with an acrylic sheet so there are no random holes, etc. It will also make it easier to create holes for the two 120mm fans for the RX240 rad. When the temperatures here in Australia become reasonable for painting I will paint all the silver aluminium black.
 
I am thinking of getting a Vandal Resistant Switch for the power button (possibly white ring illuminated) I will most likely leave the reset switch as it is.



 
Well, the shipment went missing so I had to be refunded the cost of the watercooling components...

Anyway, I am thinking of mounting the RX240 rad in the front 5.25" bay compartment instead of on the mid-plate. Thoughts?
 
The G-VANS Legion can still run fan's at super low speeds! Also, the LED colour display, as well as the Voltage/Temp readout can be changed from the front of the controller instead of using jumpers.

Here is a video of the Shamash G-VANS controller that Derek tortured for testing purposes.
http://www.youtube.com/watch?v=VVA5rSh_P80&feature=p­lcp

I personally tested the G-VANS Pulsar (still needs a lot of work), Shamash (brilliant controller, yet still not 100% complete and ready for sale), Legion (almost ready for sale), and the Mod-Kit which is simply amazing. I will take pictures of the mod kit very soon.

 
Finally decided on a red theme...
I will be using the Phobya G-Silent 14 Red LED fans for the rad and front intake, the Xigmatek XLF-F1254 for the rear exhaust and the Phobya Balancer reservoir.

I have not yet decided on what lighting I will have in the system. Tossing up between red, white, or UV LED strips.
 
I was thinking of perhaps doing a bit of white and a bit of red tubing, then having both white as well as red LED fans and strips.
 
Got to decide on what colour acrylic I should use for the mid-plate. I will be using white tubing, black chrome compression fittings, red coolant, red and white LED's, black case with some carbon fiber, either red, black, or white extensions.
 
You must log in or register to reply here.

Similar threads

WYP
The Lian Li LANCOOL 4 is AMAZING!
Replies
1
Views
121
NeverBackDown
N
WYP
Lian Li launches its LANCOOL 217 Mid-Tower PC case
Replies
0
Views
143
WYP
WYP
WYP
Lian Li launches their new Lancool 207 PC case
Replies
0
Views
182
WYP
WYP
WYP
Lian Li can fit two EATX-sized systems inside their new DK07 PC desk
Replies
0
Views
140
WYP
WYP
WYP
Lian Li LANCOOL 207 PC Case Review
Replies
0
Views
357
WYP
WYP
Back
Top