Time for a change of case

[SieB]

Have you looked at the Silverstone TJ07 S_I_N?

It's a bit on the expensive side but you might be able to get a secondhand one cheap. You can fit a thick 360 or even a 480 in the bottom you just need to get a radiator stand you can also fit a slim 240 in the top as well.

Not many cases take a thick 360 up top without having clearance issues, the best cheapish all rounder is the HAF, the Xigmatek Elysium is also a good choice but it is huge.

See this for pics of the TJ07

http://forums.bit-te...d.php?p=2348182

 

[ruthless_villain]

I have the H100 in push pull... fits fine. :S

yeah... because the h100 is really a massive rad

 

[S_I_N]

I Have the 932 and i like it alot but it's a dust magnet i have clean all the time , thinking about selling it .

true no filters but thats fixable

Have you looked at the Silverstone TJ07 S_I_N?

It's a bit on the expensive side but you might be able to get a secondhand one cheap. You can fit a thick 360 or even a 480 in the bottom you just need to get a radiator stand you can also fit a slim 240 in the top as well.

Not many cases take a thick 360 up top without having clearance issues, the best cheapish all rounder is the HAF, the Xigmatek Elysium is also a good choice but it is huge.

See this for pics of the TJ07

http://forums.bit-te...d.php?p=2348182

yeah have looked at it but like ya say a bit on the expensive sie but sweet case non the less will look at it again

yeah... because the h100 is really a massive rad

lmao

yeah if the H100 fits anything will

my rad is 60mm thick with another 50mm in fans for push/pull you need min 115mm of clearance if the HAF X had 7-8 expansion slots versus the 10 it has it would fit no doubt but those extra slots kill the upper room

Thank you all for the suggestions their great please keep them coming

 

[nothingspecial]

How's about the HAF X? Will easily take a 360 60mm deep rad and a pair of fans, and if my memory serves me right, has the dust filters the 932 lacks.

Edit: I thought it had dust filters, but Aria says it doesn't.

 

[Cyanide89]

How's about the HAF X? Will easily take a 360 60mm deep rad and a pair of fans, and if my memory serves me right, has the dust filters the 932 lacks.

Edit: I thought it had dust filters, but Aria says it doesn't.

That's what I already suggested.

It is a great case but the dust filters aren't that great. Wish mine had filters like the Antec DF-85. No big deal though.

 

[cbiltsouris]

xigmatek elysium? only thing is its bloody huuuugeee

 

[Cyanide89]

xigmatek elysium? only thing is its bloody huuuugeee

That looks awesome!

 

[S_I_N]

How's about the HAF X? Will easily take a 360 60mm deep rad and a pair of fans, and if my memory serves me right, has the dust filters the 932 lacks.

Edit: I thought it had dust filters, but Aria says it doesn't.

it'll take a thin rad with fans in push with the pulls outside the top of the case check Toms Assassin build Trust me I want the Haf X checked it extensively its those 2-3 extra pci-e slots that move the mobo up and make a thick rad with push/pull hang over the mobo

 

[fcb]

it'll take a thin rad with fans in push with the pulls outside the top of the case check Toms Assassin build Trust me I want the Haf X checked it extensively its those 2-3 extra pci-e slots that move the mobo up and make a thick rad with push/pull hang over the mobo

Sticking with the HAF X? I think it will be better suited with that extra bit of height compared to the HAF 932 Advanced. Is the thickest radiator 60mm? If you have 6 fans in a push pull setup, the whole unit should just reach the top of the motherboard right?

The Silverstone TJ07 is a great case, but it's so expensive though.

 

[S_I_N]

Sticking with the HAF X? I think it will be better suited with that extra bit of height compared to the HAF 932 Advanced. Is the thickest radiator 60mm? If you have 6 fans in a push pull setup, the whole unit should just reach the top of the motherboard right?

The Silverstone TJ07 is a great case, but it's so expensive though.

most likely just above the mobo if you mount one set of fans outside the top like Tom did with the Assassin build. but also he has the RS360 rad which is thinner than the RX360 rad. so all 6 fans plus rad inside the case would deffo hang over the mobo. the 932 while .2 inches smaller in height only has 7 expansion slots compared to the HAf X's 9 that loss of 2 slots makes the headroom more plentiful hell ya can even mount a psu up there as an option Dust is the least of my concerns as I can make filters for all the intakes without much issue. But this is still in the planning state so keep suggestions coming.

Yeah I like the TJ07 its sweet but ouch my wallet would smart

932 hafx side by side

http://www.newegg.com/Product/Produ...19-236^11-119-236-TS,11-119-160^11-119-160-TS

 

[fcb]

most likely just above the mobo if you mount one set of fans outside the top like Tom did with the Assassin build. but also he has the RS360 rad which is thinner than the RX360 rad. so all 6 fans plus rad inside the case would deffo hang over the mobo. the 932 while .2 inches smaller in height only has 7 expansion slots compared to the HAf X's 9 that loss of 2 slots makes the headroom more plentiful hell ya can even mount a psu up there as an option Dust is the least of my concerns as I can make filters for all the intakes without much issue. But this is still in the planning state so keep suggestions coming.

Yeah I like the TJ07 its sweet but ouch my wallet would smart

932 hafx side by side

http://www.newegg.co...5E11-119-160-TS

That makes sense. Wow, lots of planning to do. So you're going to go with the nVidia green theme as well?

Yup, the TJ07 is a beautiful case and with it, you do really get what you pay for. I think the TJ11 is the coolest case of them all for all those who love to customize or have a fully water cooled PC.

 

[S_I_N]

havent decided on the colors yet gotta get a case in hand first and see what pops into my head