Sr3 surfaces! picture!

[yassarikhan786]

Would you say this is going to be released at around the same price as the SR-2? because if it does, then im buying

Do you mean the SR-2's current price or it's initial price. Either way I'm guessing it will be a lot more.

 

[dipzy]

Do you mean the SR-2's current price or it's initial price. Either way I'm guessing it will be a lot more.

Sr-2's launch price, hopefully its around that much, if not, need to hope i win the lottery

 

[dugdiamond]

i have estimated about £2500 for the mobo and the two chips

if it is any more than that, i might as well get a blade server - lol

 

[yassarikhan786]

i have estimated about £2500 for the mobo and the two chips

if it is any more than that, i might as well get a blade server - lol

Total Cost = Very good used car

.

 

[dipzy]

Folding at home on this, oooooooooooo

Need to stop making purchases for my current rig in order to save for the next one

 

[unknownuser200]

well there both quad channel memory , but i think the one over the pcie slots only has 4 do to lack of room nothing more. keep in mind also irrc the xeon cpus arent as concerned about the 130 watt heat limit and i beleave are 8 core +.

 

[Cyanide89]

Total Cost = Very good used car

.

Yeah one of these: GTR

 

[yassarikhan786]

Yeah one of these: GTR

Which one would you choose?

 

[Ravious]

Looks amazing!

 

[unknownuser200]

"The SR3 is a dual socket LGA2011 2P enthusiast desktop/workstation motherboard in the E-ATX form factor. Socket 0 is wired to eight DDR3 DIMM slots (two DIMMs/channel), while socket 1 to four slots (1 DIMM/channel). In LGA2011 2P systems, the processor sitting on socket 0 is wired to the PCH (SR3 looks to have Patsburg-T), while the processor on socket 1 is wired to the one on socket 0 using two QPI links, closing the daisy-chain. Socket 0, apart from its 4 GB/s DMI link, has a PCI-Express 2.0 x4 (another 4 GB/s) link to supplement the DMI link, so the storage controllers don't get bottlenecked with just DMI. Both processors contribute to the PCI-Express lane budget of the motherboard. There are seven PCI-Express x16 slots, among which four are PCI-Express 3.0 x16 capable, every slot is PCI-Express 3.0 x8 capable. NVIDIA 4-way SLI is supported. This board will support Sandy Bridge-EP Xeon processors, though we don't know at this juncture if Core i7 Sandy Bridge-E is 2P capable."

http://www.legitreviews.com/news/11713/

source ^

 

[mrDMxtreme]

OMG first of all that is one beast of a board, if i won the lotto i'd buy a few and have a blast building on them..... till then just dream about having one of these

look at all the power it can take

1 X 24pin 2 X 8pin 3 X 6pin thats all i can see, but dammmmmmm

dugdiamond if you can get Tom to do a TTL build on that it'd be awesome, if not, can you please invite him over just so he can show us our epic build?

 

[unknownuser200]

plus nf200 chips im reading all that pcie bandwitdh sounds like 4 3.0 slots at full speed... and the rest 2.0 slots at full speed

4 way sli, + physc and a fusion io drive or 2

if it were me and it prolly never will be which is why im saying my ideas (otherwise i wouldnt share till it was done)

id do this

this motherboard 2 of the 8 or 10 cores w/e is out

http://www.adata-group.com/index.php?action=product_feature&cid=5&piid=88

8 sticks of this ram amazing speed 8-8-8-24 at 2200 mhz due to the 2gb density etc (16 gb should be plenty)

4 kepler top ends... 2 corsair ax850s (do there small size 1700wats should be plenty)

caselabs th10

a mora 3 extreme the 9 x 140mm rad for video cards it w in the psu side with some mods with fans d5 pumps in series for enough pressure

a coolgate monsta (rebranded feser monsta) for cpus

d5 with dress up kits

phoyba black nickle 450 ml res's

fusion io 2 duo drive 1.2tb (for everything would be enough)

all noiseblocker fans

idk what fan controller

mayhem marble coolant but a red verion so it looks like lava

ek blocks with crome bits power fittings

bittfinex cables

second skin sound deadning all the way around the 3 layer process so its silent

maybe carbon film it in black

red and white lighting by bit fenix

and maybe a asus xonar sound card

clear 3/4 tubing

eizo 36.4 4k2k monitor.

thats my dream computer to bad it will only be a dream i think itd look amazing,and i could do it myself easily enough. It would perform amazing, and i could make it absolutely silent. itd be perfect IMHO oh well i can dream.. maybe this will give you guys who have bigger wallets some ideas

http://www.frozencpu.com/products/1..._-_Black_Powder_Coat_22120.html?tl=g30c95s667

theres the mora rad

http://www.frozencpu.com/products/1...treme_Performance_Radiator.html?tl=g30c95s931

and the monsta for anyone who hasnt seen them

 

[TicTac]

They need to make one with blue PCI-E and dimm slots!

 

[dipzy]

They need to make one with blue PCI-E and dimm slots!

That would be great for those of us who want a blue themed rig with out red showing.

 

[FunkyMonkey90]

Right time to start saving!

 

[unknownuser200]

or even green would be cool.... that would make for an awesome build.... oh wells..

 

[SparkleDJackson]

so was skulltrail the sr1. or was sr2 the first and skulltrail was something else altogether

 

[unknownuser200]

skulltrail was intel

 

[SparkleDJackson]

So was there an sr1

 

[stevenwright6379]

So was there an sr1

nope

SR2 was the first of its kind from EVGA