Sr3 surfaces! picture!

[SparkleDJackson]

nope

SR2 was the first of its kind from EVGA

Cheers for clearing that up for me sir strawberry

 

[Stromatolites]

I swear I saw that image a few months back, I even had it saved in my image folder

 

[unknownuser200]

there was a photochopped verision of it

http://www.gnd-tech.com/threads/6817-EVGA-SR-4-Ultra-(not)-announced!

is this what u were thinking of?

 

[Stromatolites]

Nope it had the same Ram layout as seen in the legit picture ...

 

[JackyBoy]

plus nf200 chips im reading all that pcie bandwitdh sounds like 4 3.0 slots at full speed... and the rest 2.0 slots at full speed

4 way sli, + physc and a fusion io drive or 2

if it were me and it prolly never will be which is why im saying my ideas (otherwise i wouldnt share till it was done)

id do this

this motherboard 2 of the 8 or 10 cores w/e is out

8 sticks of this ram amazing speed 8-8-8-24 at 2200 mhz due to the 2gb density etc (16 gb should be plenty)

4 kepler top ends... 2 corsair ax850s (do there small size 1700wats should be plenty)

caselabs th10

a mora 3 extreme the 9 x 140mm rad for video cards it w in the psu side with some mods with fans d5 pumps in series for enough pressure

a coolgate monsta (rebranded feser monsta) for cpus

d5 with dress up kits

phoyba black nickle 450 ml res's

fusion io 2 duo drive 1.2tb (for everything would be enough)

all noiseblocker fans

idk what fan controller

mayhem marble coolant but a red verion so it looks like lava

ek blocks with crome bits power fittings

bittfinex cables

second skin sound deadning all the way around the 3 layer process so its silent

maybe carbon film it in black

red and white lighting by bit fenix

and maybe a asus xonar sound card

clear 3/4 tubing

eizo 36.4 4k2k monitor.

thats my dream computer to bad it will only be a dream i think itd look amazing,and i could do it myself easily enough. It would perform amazing, and i could make it absolutely silent. itd be perfect IMHO oh well i can dream.. maybe this will give you guys who have bigger wallets some ideas

theres the mora rad

and the monsta for anyone who hasnt seen them

This pretty much my shopping list!

Except multiple monitors (with lower res mind you!) and more ram! haha

 

[FragTek]

mmmmm, 14 sata ports.

 

[DwarfAdigginAhole]

"The SR3 is a dual socket LGA2011 2P enthusiast desktop/workstation motherboard in the E-ATX form factor. Socket 0 is wired to eight DDR3 DIMM slots (two DIMMs/channel), while socket 1 to four slots (1 DIMM/channel). In LGA2011 2P systems, the processor sitting on socket 0 is wired to the PCH (SR3 looks to have Patsburg-T), while the processor on socket 1 is wired to the one on socket 0 using two QPI links, closing the daisy-chain. Socket 0, apart from its 4 GB/s DMI link, has a PCI-Express 2.0 x4 (another 4 GB/s) link to supplement the DMI link, so the storage controllers don't get bottlenecked with just DMI. Both processors contribute to the PCI-Express lane budget of the motherboard. There are seven PCI-Express x16 slots, among which four are PCI-Express 3.0 x16 capable, every slot is PCI-Express 3.0 x8 capable. NVIDIA 4-way SLI is supported. This board will support Sandy Bridge-EP Xeon processors, though we don't know at this juncture if Core i7 Sandy Bridge-E is 2P capable."

http://www.legitreviews.com/news/11713/

source ^

E-ATX?!?!?!?! You mean this beast is not an HPTX board

 

[dipzy]

E-ATX?!?!?!?! You mean this beast is not an HPTX board

Its definitely a HPTX, there's no way its an E-ATX board, Its too big, must be a typo

 

[BaMb1N0]

shall i sacrifice a week @ maldives for that one? hmmm........not sure yet.

 

[unknownuser200]

no they ment Extreme atx not extended

lol