RV02B-W Build.

N

neoguyver1

New member
CPU: XEON W3520 @3.66

CPC: ZALMAN CNPS 9900

RAM: 6GB Corsiar XMS 1333mhz DDR3 CL8

MOB: GA-EX58-EXTREME

GPU: VTX3D HD6970

PSU: 700W Superflower

HDD: 1 SAMSUNG 500GB F3 + 1TB SAMSUNG

CASE: Silverstone SST-RV02B-W

OS: windows 7 64 bit

1.jpg


2.jpg


3.jpg


4.jpg


5.jpg


6.jpg


7.jpg


10.jpg


8.jpg


9.jpg


11.jpg


13.jpg


14.jpg


15.jpg


16.jpg
 
Very nice build.

In P1020081, is that just the roof not secured on fully?

Anyway, what kind of temps do you get in the case?
 
Thanks guys
smile.gif
I have a resistor on the zalman(came with it) and at @stock the cpu is 30-31 @ 3.8 it is 42-43, the 3 big fans are on low and there is another resistor on the 120mm as i like a quiet as possible rig.

Yes that is with the roof off just to see the cables and all.

It is a fairly cool looking case I have it up for sale but not sure which card i will end up with before i do.

Always chopping and changing
laugh.gif
 
KiiYzOo said:
nice
smile.gif
what's the xeon like as I've never really heard how good they are?
Click to expand...

There pretty much the same as the consumer equivalent, i cant speak for the i7 versions but the socket 771(they fitted in 775 fine) ones apparently got slightly lower/the same clocks but at better voltages and/or better temps as there stock clocked equivalents. Either way they tend to run a little lower voltages at stock thus lower heat output so better for tightly packed rack environments.
 
Update on the Graphics card I ordered a VTX3D 6970 dual fan cooler like pcs+ only red.
laugh.gif


Finding the xeon good same as the 920D0 but a few differences as mentioned above i settled for a 3.33 stock voltage in BIOS but is nearer 3.5 on speccy.

I have never overclocked an intel before, i want to get it up to 4.0 and have but need to adjust so the extra .2 is not there perhaps the turbo boost?

I am gonna see how close the VTX3D id to the pcs+ and may flash the BIOS to the 940mhz core.

(see how goes)

I will be updating the pictures as soon as card is in and will clean it up and proper.
 
tinytomlogan said:
still no pictures? /yawn/ bored now.
Click to expand...

LOL! There should be some greasy pics at the top with a 5830.

I have to update them, when the new card is in.

Oh and bought the Raven after TTL's review of the white one.(they only had black and didn't get the nzxt phantom
laugh.gif
)

PS: >Oh most of my upload quota is used up the pic above is 190 odd kb where is the other 300
blink.gif
.<
 
Got her stable @4.2 well after a few goes of IntelBurnTestV2 will try prime95 tomorrow. temps are 40-42 idle but went very high nudged 100 at one point I may have to bring her back to 4.0 or get a new cooler, any suggestions for the i7/xeons?
 
I Hunta x said:
There pretty much the same as the consumer equivalent, i cant speak for the i7 versions but the socket 771(they fitted in 775 fine) ones apparently got slightly lower/the same clocks but at better voltages and/or better temps as there stock clocked equivalents. Either way they tend to run a little lower voltages at stock thus lower heat output so better for tightly packed rack environments.
Click to expand...

They are supposed to run a bit hotter but supposedly able to cope better with higher temps.
 
You must log in or register to reply here.
Back
Top