Project ATG

I was having BSOD issues when using gputweak with mine. I'll stick with afterburner.
Anyway, the rig looks stunning, really neat and tidy, should be easy to clean as well with that thermal armour :P
 
Thanks guys, yes I must say it's the first time I have such a clean case... all the parts matched very well and I am verey happy with this build.
Performs great and had no trouble so far! Which is not the case with my other build TUF550 unfortunatly!
Will run some benchmarks later...
 
Nice build. Did you decide on which board to go with?

Judging from where your PC is postioned you won't be able to see the internals even if you have a window so it doesn't matter what it looks like. Go with the one that gives the bestperformance.
 
Nice build. Did you decide on which board to go with?

Judging from where your PC is postioned you won't be able to see the internals even if you have a window so it doesn't matter what it looks like. Go with the one that gives the bestperformance.
I went with the Sabertooth Z77.
Yeah nobody is going to see the inside, but I kinda of like to know it does look good inside, and will be easier to clean up too ;)

Just ran Unigine Heaven 3.0, becnhmark, score = 1106 at 1920x1080 and all settings at max.
Video card temp goes up to 73C, but still very quiet!
 
Got myself the Corsair Vengeance 1500 headset and my second GTX670-DC2-2GD5 is finally on its way!!!
 
And here comes the SLI :rolleyes:

img1571m.jpg

img1569mb.jpg

img1572hh.jpg


Unigine Heaven 3 benchmark: 3249, almost 3 times higher than with the single card!
 
Last edited:
3DMark11 benchmark: performance mode = P14940, extreme mode = X5717

Temperatures idle: card1 = 36C, card2 = 34C
Temperatures load: card1 = 80C, card2 = 72C
 
I thought those cards were triple slot? Nonetheless epic rig mate! I can't describe how jealous I am! ;)
Thanks, i am really happy with this build... But trust me it's the first time in my life that I have such a decent rig... First time ever to go SLI!
Those cards really rock, got 130 fps in unigine heaven 3 with everything maxed out!
If I raise the fans to 100%, load temps rise to 67C for card1 and 61C for card2 and yet not noisy at all!
 
just decent?? It's a beast m8 ! nice and clean.
the roof fans r set as intakes?
btw , if u sleeve the cables (red color) and cover the sli bridge with red vinyl it will be epic.
 
just decent?? It's a beast m8 ! nice and clean.
the roof fans r set as intakes?
btw , if u sleeve the cables (red color) and cover the sli bridge with red vinyl it will be epic.
Yeah i agree, quite a beast indeed ;)
Yes the top fans are set as intake to cool the rad of the H100...
I am thinking about getting red braided cables (too lazy to do it myself) and you are right the sli bridge will look way better with some red vinyl cover, thanks.
 
Back
Top