Please help

[Aimzor]

Here are the pictures of my completed loop.

http://imageshack.us/g/1/10248954/

I filled the reservoir and powered on my PSU. It only seemed to move a minimal amount of liquid before the water level stopped dropping. It moved maybe 250 ml before it started making an odd sound, I turned it off immediately and took pics and made this post. I feel like everything is setup correctly. The only thing I can think of is perhaps switching the two tubes going to the ports labeled (IN) and (OUT) on the pump although I don't know if this would have any effect. If someone knows where I went wrong with my build I would be eternally grateful.

Here is the loop order.

res/pump (OUT) -> rad

rad -> cpu (IN)

cpu (OUT) -> gpu

gpu -> res/pump (IN)

 

[tinytomlogan]

Have you bled all the air out matey?

 

[Greenback]

The sound wasn't air in the impeller of the pump, try tilting the case back and forth left and right.

 

[jamesriley94]

Looking at the pictures - the reservoir looks empty, and the pump doesn't look to be getting any water.

The reservoir needs to be at a stage where it doesn't drop massively in level as soon as you turn the pump on before you even think of tilting the case and bleeding it.

 

[mArTyN]

Just had a look at the pics, what is the "Y" splitter for ?

 

[paulstung]

I went to have a look at the pics but have you removed the pics that people commented on ?