PC3-19200 8GB RAM module

[NotSure]

I want to choose which RAMs to use.
My initial choice was.
G Skill Ripjaws Z 8x8GB PC3-19200
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231523

I am also thinking of this.
4x Corsair dominator platinum PC3-19200
http://www.corsair.com/en/dominator...annel-ddr3-memory-kit-cmd16gx3m2a2400c10.html

Any way searching newegg for RAM with 8GB and are PC3-19200, i found those.


http://www.newegg.com/Product/Produ...6145 600083963&IsNodeId=1&name=32GB (4 x 8GB)


http://www.newegg.com/Product/Produ...6145 600006072&IsNodeId=1&name=16GB (2 x 8GB)


Tell me what do you think.

The processor will be probably either 3930k or 3960x.
The Board will be probably Asus Rampage IV Extreme.

 

[seumasbeathan]

What will you be using your pc for?

 

[NotSure]

What will you be using your pc for?

Gaming , development.
Later maybe rendering.



Just assume heavy usage.
Or assume folding.

 

[seumasbeathan]

Do you really need that amount of ram? 16gb should be fine :L

 

[airdeano]

you'd prolly be as well off using the CMD16GX3M2A1600C9 2x 8gb 1600.
unless you are a large power user, extreme enthusiast, or like posting
valadation numbers. saves you monster $130 for a better SSD or GPU.
even 3D rendering and CAD doesnt get a boost in clock on memory.

airdeano

 

[jamesriley94]

Unless you intend on having like a 48gb RAM cache - it really is completely pointless. No program you'll use will utilise 64gb of RAM.

 

[NotSure]

Unless you intend on having like a 48gb RAM cache - it really is completely pointless. No program you'll use will utilise 64gb of RAM.

No program alone.

Any way.

for now i might buy 4 x 8 or less.
But i want to know which one will be better in case i want to go for full 8x8.

ty

 

[seumasbeathan]

Honestly I would just go for 2 x 8

 

[NotSure]

you'd prolly be as well off using the CMD16GX3M2A1600C9 2x 8gb 1600.
unless you are a large power user, extreme enthusiast, or like posting
valadation numbers. saves you monster $130 for a better SSD or GPU.
even 3D rendering and CAD doesnt get a boost in clock on memory.

airdeano

So , if i get more clock speed for memory it is pointless at all ?
Can you explain in detail , thank you.

 

[NotSure]

Honestly I would just go for 2 x 8

Ok , good .

But the question is not how much ram ,
the question is which of those that i have mentioned above is better

 

[seumasbeathan]

Go for some Corsair Vengeance 1600mhz

 

[NotSure]

Go for some Corsair Vengeance 1600mhz

RAM clock speed does not matter ?

BTW , GZ for 2k posts

 

[seumasbeathan]

Over 1600mhz not so much

 

[NotSure]

Over 1600mhz not so much

Ok ,
But i was wondering.
A PC3-19200 RAM can be OCed to 2400?
And can run normally on lower speeds?

If so , then Lower speed RAMs can OC to lower speeds ?
I really do not get it

 

[airdeano]

So , if i get more clock speed for memory it is pointless at all ?

the access cycles of the RAM are faster, translated means the app will
run faster. prolly 4-30ms faster.. noticably un-noticable. if one were upgrading
from 1000 to 2000MHz then a fluid easy feeling would be noticed.. but when
CAD/CAM or rendering large files there isn't a $100 difference. i run a RAM drive
in one machine and going from 2133 to 1600 had no effect at all using 32MB
of RAM. i think 2133 was 3-5% better in ATTO benchmark between the two.
again.. app-wise no difference and gamers have said the same.. save the bucks
on high speed and spend it where it'll matter more.

airdeano

 

[NotSure]

the access cycles of the RAM are faster, translated means the app will
run faster. prolly 4-30ms faster.. noticably un-noticable. if one were upgrading
from 1000 to 2000MHz then a fluid easy feeling would be noticed.. but when
CAD/CAM or rendering large files there isn't a $100 difference. i run a RAM drive
in one machine and going from 2133 to 1600 had no effect at all using 32MB
of RAM. i think 2133 was 3-5% better in ATTO benchmark between the two.
again.. app-wise no difference and gamers have said the same.. save the bucks
on high speed and spend it where it'll matter more.

airdeano

Ok
G skill
or
CORSAIR dominator
or
CORSAIR vengeance
or
CORSAIR dominator platinum ?

ty

 

[seumasbeathan]

Corsair Vengeance

 

[airdeano]

for function either the GSkill or Corsair Vengence. for looks cant pass
the platinums without a double take..

just be careful on air-coolers as the height of the heatsinks really destroys
some uses of heatsink kits..

airdeano

 

[NotSure]

for function either the GSkill or Corsair Vengence. for looks cant pass
the platinums without a double take..

just be careful on air-coolers as the height of the heatsinks really destroys
some uses of heatsink kits..

airdeano

I know , low profile needed for some air coolers.
Any way i will be probably be using the CORSAIR Hydro H100

Any way , what do you mean by "function" ?

 

[nex-s]

I know , low profile needed for some air coolers.
Any way i will be probably be using the CORSAIR Hydro H100

Any way , what do you mean by "function" ?

For getting work done!

And really man, you're just wasting your or your parents money here seemingly not understanding what you do and what you do not need.