Overclocking i7-4770k on MSI Z87-GD65 Gaming

EliteVX said:
Can you list the exact change(s) you made in BIOS setting for me please? :)
Click to expand...

No problem, when i come back from work i will post it here.

I also set DDR3 8GB 4 x 2 GB OCZ XTC Platinium OCZ3P1333LV2G to 1600Mhz and 1.5V

i followed TTL guide step by step starting from default bios setting. And i get better results then first time.
 
szembor said:
No problem, when i come back from work i will post it here.

I also set DDR3 8GB 4 x 2 GB OCZ XTC Platinium OCZ3P1333LV2G to 1600Mhz and 1.5V

i followed TTL guide step by step starting from default bios setting. And i get better results then first time.
Click to expand...

I hope you didn't forgot me, also where's this guide?
 
Ok, i think this is all from me. I tested many configuration above 4.3 Ghz and i get BSOD every time. I think i will stay at 4.3Ghz CPU Ratio 43, DRAM Frequency 1333 and set 1.255V CPU VOLTAGE and it is stable. Temps in Prime 95 max 67C. Maybe i will back to OC later but now im done. Maybe it is max what i can get from this chip.
 
Is my memory is not too weak? because the processor is unstable above 4.3?
DDR3 8GB 4 x 2 GB OCZ XTC Platinium OCZ3P1333LV2G.
4.3 is stable but sometimes when my windows 8.1 loads there is no mouse cursor on screen and few autostart program doesn't start. Then i need to restart my PC. It is caused by unstable CPU?
 
szembor said:
Is my memory is not too weak? because the processor is unstable above 4.3?
DDR3 8GB 4 x 2 GB OCZ XTC Platinium OCZ3P1333LV2G.
4.3 is stable but sometimes when my windows 8.1 loads there is no mouse cursor on screen and few autostart program doesn't start. Then i need to restart my PC. It is caused by unstable CPU?
Click to expand...

4x2gb,no matter how strong the imc-controller is,itll strain it.If you had only two dimms(2x4gb) is a better option.But most likely,you have lost in the silicon lottery.
Other option,the mobo isnt able to handle all 4 dimm-slots occupied.
 
I did a 4.4GHz @ 1.330 (any voltage lower than that caused BSoD) tested with AIDA64 for 7 and a half hours, highest core temperature reached 90° C, is it good?
 
EliteVX said:
I did a 4.4GHz @ 1.330 (any voltage lower than that caused BSoD) tested with AIDA64 for 7 and a half hours, highest core temperature reached 90° C, is it good?
Click to expand...

no tbh that voltage is pretty high for 4.4ghz. i think about 1.2v for 4.4 is the average
also i wouldn't be comfortable with 90 C
 
You must log in or register to reply here.

Similar threads

S
Overclocking 4770k on Asus VI Formula(noob)
Replies
0
Views
1K
Sephonia
S
M
msi z87 gd65
Replies
9
Views
4K
resin1980
R
T
Need help! 4770k won't overclock at all, stuck at 800mhz
Replies
0
Views
1K
tabby051
T
R
GPU Overclocking advice
Replies
10
Views
2K
RobCrezz
RobCrezz
E
[Review] Getting to know MSI-Z77A-GD65
Replies
7
Views
7K
eminus
E
Back
Top