I have a Phenom 2 x6 1035T, PSU 600W and a GTX 560 form MSI. (N560GTXM2D1GD5).
I used http://www.hwcompare.com/ to choose the Graphics card.
Out the box it runs at 810 Core Clock / 1620 Shader Clock / 2004 Memory Clock @ normal Mv.
Using afterburner its suggested that the max Stable results on this card were 1005 Core Clock / 2010 Shader Clock / 2230 Memory Clock @ 1087Mv. Although some wont get to 950 Core clock.
Would I damage my card if I increased the voltage first, then moved up the setting to near the ones mentioned above, as long as its within temp and stable.
I used http://www.hwcompare.com/ to choose the Graphics card.
Out the box it runs at 810 Core Clock / 1620 Shader Clock / 2004 Memory Clock @ normal Mv.
Using afterburner its suggested that the max Stable results on this card were 1005 Core Clock / 2010 Shader Clock / 2230 Memory Clock @ 1087Mv. Although some wont get to 950 Core clock.
Would I damage my card if I increased the voltage first, then moved up the setting to near the ones mentioned above, as long as its within temp and stable.
