frufsa New member Dec 10, 2014 #1 Does annyone know if its posible to use the old ax series sleeved pci-e cables on a RM750 psu? Dont need the 24pin or anny of the other cables, just 1 pci-e cable.
Does annyone know if its posible to use the old ax series sleeved pci-e cables on a RM750 psu? Dont need the 24pin or anny of the other cables, just 1 pci-e cable.
YouWhat New member Dec 10, 2014 #2 If you have a multi-meter then you can check the pin outs on it and make sure they the same, then yes you should be able to, but doing so at own risk
If you have a multi-meter then you can check the pin outs on it and make sure they the same, then yes you should be able to, but doing so at own risk
Feronix New member Dec 10, 2014 #3 Considering they have completely different OEMs I'm assuming you can't. Also, Corsair sell braided cable kits for both units, but they are different kits and don't seem to be compatible with each other.
Considering they have completely different OEMs I'm assuming you can't. Also, Corsair sell braided cable kits for both units, but they are different kits and don't seem to be compatible with each other.
Dawelio Active member Dec 10, 2014 #4 From what I've gotten to know after being in touch with Corsair Support regarding cabels for an HX850i... the answer to your question is a no unfortunately. They aren't compatible, since it's 2 different PSUs (basically what Feronix said above).
From what I've gotten to know after being in touch with Corsair Support regarding cabels for an HX850i... the answer to your question is a no unfortunately. They aren't compatible, since it's 2 different PSUs (basically what Feronix said above).
frufsa New member Dec 10, 2014 #5 Tested, and can confirm that they dont work, diffrent connector :/ Well well, to bad.
