New builder : Big trouble

[joey117]

The system I builded is :

90-MXGLT0-A0UAYZ ASRock B75M-ITX Motherboard i7
Gskill 8GB DDR3 1600 PC3-12800 Dual Channel Ripjaws
BitFenix Prodigy Mini-ITX Cube Case - Black
650W Corsair Series TX650
ASUS GTX 660
Intel Core I5 3570K Ivy Bridge 1155

and i read the manual and put it all together and it does nothing at all no fan lights nothing

any help would be great

 

[airdeano]

24-pin and 4-pin motherboard power comes to mind. possible faulty PSU connection.
power switch connection..

 

[joey117]

Yea all connected the 4 pin i am use a 6 pin for it

 

[airdeano]

huh? the 4-pin EPS is a 6-pin.. what?

 

[joey117]

they was no 4 pin connector on my psu but i was told a 6 pin pci-e what do the job and i just use a moplx to 4 pin connector still the same

 

[Feronix]

I don't know who told you that but that's not going to work. Try to find an 8 pin cable and see if you can split the ends to get 2x4 pins on one cable. Then plug any of the ends into the 4 pin header on the top of your motherboard.

 

[joey117]

i connect a molex to and 4 pin adaptor and still the same but can you cross out pin to check your psu ?

 

[Bang]

adaptor? just get the correct psu. Molex connectors do not connect to motherboards - ever. If someone sold you a 10 year old power supply count your losses and get new one.

Edit: http://www.asrock.com/mb/Intel/B75M-ITX/ to the left of the battery there is a place for a square 4 pin connector, no Molex connector

 

[Feronix]

Can you take pictures of how you've plugged everything in? Cause i honestly don't know what you mean, or you've done something very wrong...

Also, what power supply do you have?

 

[Cru]

650W Corsair Series TX650

Also, what power supply do you have?

he said that mate

 

[Feronix]

he said that mate

My bad, I missed it.

Watch this video from 2:30

http://www.youtube.com/watch?v=RZo2QWXyakM&list=WL2CAB9A122338F820

 

[airdeano]

the HX650 has a 4+4 EPS connector on the main harness. it can be split up into
2 4-pin connectors.

 

[Bang]

When in doubt rip everything apart and start over from scratch. Make sure you dont miss something on the second try.

 

[SeekaX]

no way a PSU of that kind comes without 4pin connectors.
set your cables up properly and you wont run into problems, no shortcuts, no special tips from semi professional builders.