My rig with H100 and Noctua Fans

Samuel

New member


Just a update added a second EVGA Superclock 570

3d mark 11 x4091 http://3dmark.com/3dm11/2066370 p11320 http://3dmark.com/3dm11/2066519

The specs of this system are are cpu i7-950@4.2GHz, motherboard EVGA X58 SLI 3, Corsair H100 liquid cooling, memory 12GB CORSAIR DOMINATOR DDR3 1600@1610MHz, boot drive OCZ Vertex 2 60GB SSD, main programs drive WD VelociRaptor 300GB, video cards Two Superclocked EVGA GTX 570s in SLI , power supply CORSAIR 750watt, and case Coolermaster HAF 932


DSC_0128.jpg


This computer is 24/7 stable the current clocks.
 
Thanks guys!

I didn't use the fans that came with the H100 at all, I used two 120mm Noctua fans from a old Noctua NH-U12P and two Coolermaster fans of of a hyper 212+.

The Noctua fans are running on 12 volts and the Coolermaster fans are connected to the H100 pump on low.

As you can see in the picture I ran Prime95 for 30 minutes and got an average temperature across all the cores of 72c with a ambient temp of 25.3c for a delta of 46.7c . This is at 4.2GHz and 1.35 volts to the core.

As for the noise I would say it is as quite if not quieter than the stock fans on low.

DSC_0123.jpg
 
Back
Top