My overlocks, q6600 & 8500gt

[Lynx]

Not the fastest but amazed on the card....

 

[Youngie1337]

Nice job Lynx, you need to get that Q6600 @ 3.4-3.8 man. What is your cooling on the CPU? I notice there is a big difference in the cores, have you applied the paste and is the heatsink fitted correctly?

 

[nepas]

Nice work on the gfx card!Now push that quad further,that board can do way more than that.My quad shows the same as yours with the temps,core 3 is 7 degrees lower

 

[Rastalovich]

Does that TPower 'feel' enough like an ABit mobo ?

Love to see some loose benches of the 8500.

 

[zak4994]

Nice work on the GPU!

I had gotten my 8400GS to the same levels (approx.)

 

[Lynx]

cpu can do so much more, but i dont want to push it as im sendig it off today.

 

[sammytomjohn]

Nice job Lynx, you need to get that Q6600 @ 3.4-3.8 man. What is your cooling on the CPU? I notice there is a big difference in the cores, have you applied the paste and is the heatsink fitted correctly?

think 3.6 is the sweet spot! right dude

cpu can do so much more, but i dont want to push it as im sendig it off today.

yumyum!! :yumyum:

 

[Lynx]

Can some one tell me what speed my ram is running at?

 

[sammytomjohn]

think it runnin at 1082mhz dude

 

[Lynx]

thought so thats a 16mhz oc! OMFG GET SOME LN2 ON IT

 

[sammytomjohn]

thought so thats a 16mhz oc! OMFG GET SOME LN2 ON IT

lmao

 

[Lynx]

Does that TPower 'feel' enough like an ABit mobo ?

wouldnt know mate, but its a gd board

 

[Ghosthud1]

my mate has the same board as yours bud and he says he's having the worst time of his life clocking his q9450, i thought the tpower was more of a e8000 series clocker

 

[Lynx]

yeh mate its an ideal match for e8 series, handles high fsb very well, q6600 not to bad on it, just about to stick on old celly in there and clock the hell out of it..

 

[Ghosthud1]

yeh mate its an ideal match for e8 series, handles high fsb very well, q6600 not to bad on it, just about to stick on old celly in there and clock the hell out of it..

"shwing" i wanna see some screenies of the celly past 8ghz

 

[Youngie1337]

"shwing" i wanna see some screenies of the celly past 8ghz

Think I seen a celly in this mag I just purchased for cheap as chips. £15 incl del.

 

[Lynx]

Got it at 3.6 earlier, from 2, will have to see if i can push it more when i get home.

 

[AndrewDrinnan]

My 3rd core measures around 8C lower aswell. Dont know if it means there is a sensor placement issue or if that core just doesnt perform as much of the demmanding task or not.

 

[nepas]

Mine does the same

 

[Nathanial]

yeh mate its an ideal match for e8 series, handles high fsb very well, q6600 not to bad on it, just about to stick on old celly in there and clock the hell out of it..

Hey lynx :wavey: when going for a max OC remeber to use only one stick of ram as it will help those higher clocks i hope this benching is going towards some points for your forum here at OC3D hehee.