paulstung
New member
So after buying a few upgrades,new case the Silverstone raven rv-03,cpu cooler,Silver arrow extreme,a pair of noctuas,NZXT cable extensions and a whole bunch of other things,I proceeded to strip down my rig and desk.
So after a good 12 hours and countless cups of coffee,I rebuilt the rig,mounted the monitors on the wall.After drilling through the internal wall cable for the socket (I did use a cable finder,but it was too low,so with a level I marked directly 3" above the previous hole,and I was plunged into darkness.Just my luck I had a blind leccy who done the wiring and it was wonky)
After calling my spark mate,he fixed the cable,then they went up.And then reconnected everything.I will post some pics,and new specs over on the other section.Sorry for the poor quality but I've ran out of batteries for my camera.
So after a good 12 hours and countless cups of coffee,I rebuilt the rig,mounted the monitors on the wall.After drilling through the internal wall cable for the socket (I did use a cable finder,but it was too low,so with a level I marked directly 3" above the previous hole,and I was plunged into darkness.Just my luck I had a blind leccy who done the wiring and it was wonky)
After calling my spark mate,he fixed the cable,then they went up.And then reconnected everything.I will post some pics,and new specs over on the other section.Sorry for the poor quality but I've ran out of batteries for my camera.


