mach2 ownage -36c

W

Warlord Shigs

New member
mach2 ownage -37c

lowest temp ive eva seen on a cpu in my mach2. p4c 3gig at stock readin -36 with mbm5 :D right imma start clockin now, jus fired up my ocz 4400 el goin for sum 1:1 overclockin especially now that i have a vdroop and vdimm modded p4c800-e deluxe. 300 fsb 1:1 :D jus ave 2 wait and c
 
the lowest i have seen on mine is -38 thats a mach 2 then it settles at around -30 load temp is -20 thats with a 3.2 @3.9 i can take it more but it becomes unstable thats until i get some new memory still running it with pc3200 @3:2
 
Mine was idle -43 full load -36 with my amd xp2800 2.08jig running @ 14 x 200 so 2.8jig ( maxed out i think ) but now its a bit warm only getting - 31 full load if i go turbo ill see what i get laters:D

But was told amd run colder than the p4 but this used to hit 60 degrees @ 12.5 x 200 on air my old aero 7
 
fatty said:
Mine was idle -43 full load -36 with my amd xp2800 2.08jig running @ 14 x 200 so 2.8jig ( maxed out i think ) but now its a bit warm only getting - 31 full load if i go turbo ill see what i get laters:D

But was told amd run colder than the p4 but this used to hit 60 degrees @ 12.5 x 200 on air my old aero 7
Click to expand...

thats a mach2 gt aint it??
 
good score m8! I'm prob gonna run stock 1st on X800XT til I get bored, then pelt it. trouble is, something new will be out by then begging for mi dosh:(

sw
 
cheers guys. i jus ran 3dmark03 with my p4 @ 4.2 and xt at stock and got 7062 hopin 2 break 8000 point wen i get my w/c setup. phil with ur maze 4 gpu block wat clocks are u gettin? cos im in 2minds about runnin a pelt on my card 24/7 :confused:
 
name='Phil Stanbridge' said:
I personally wouldnt want to run a pelt 24/7 - I'd worry about condensation. As for clocks with my 9800XT I got 490/400 odd.
Click to expand...
im aimin for over 500 on the core and 400 on mem. so looks like pelt mayb my only option. wat w/c setup would u lot advise for peltin my 9800xt and coolin my northbridge on my p4c800-deluxe which goes upto 40c!, so i want 2 watercool that. also this will all b goin into my pc-65 case
 
You don't really need a pelt to hit those sorts of clocks on your XT..

My Hercules XT will hit 517/420 using just straight water with a 92mm Thermochill Rad and a DangerDen Maze4 GPU block
 
tc_overclocker said:
You don't really need a pelt to hit those sorts of clocks on your XT..

My Hercules XT will hit 517/420 using just straight water with a 92mm Thermochill Rad and a DangerDen Maze4 GPU block
Click to expand...

those are nice clocks. wat are the temps? idle & load
 
name='tc_overclocker' said:
GPU sits at about 25C and won't hit 35C at full load after a few hours of Battlefield :D
Click to expand...

nice! so are u jus coolin the grx card, and nothin else on ur setup? wat pump are u usin there m8?
 
It was on a loop on it's own... DD GFX Block, Hydor L20, TC 92.1 and a UV Bay Res... and it looks as follows

closeup.jpg
 
I was gonna say they are damn fine clocks mate - I'm using a thermochill 120.3 and the maze 4 gpu and a cpu block now and I still dont imagine I'll be able to hit those speeds. It's because of the seperate loop.

Edit: Are you sure about those gpu temps mate? I've got the same card, and with mine at idle its still around the 50 degree mark!
 
You must log in or register to reply here.
Back
Top