K8N Neo2 & FX55 Freezing on bios intro

[ZaX]

Hi all,

I have just upgraded my system to the following specs;

FX-55 week 44

MSI K8N Neo2 s/n 0411902223 bios 1.3

2 x 512 Gb of Twinmos winbound UTT

Mach 2

BFG 6800 Ultra OC

2 X WD 36 Gb Raptors (Sata 3 & 4)

PC Power & cooling 510 Deluxe Volt modded;

3.3v @ 3.6v

12v @ 12.6v

5v @ 5.49

My problem is that the system will often freeze upon rebooting on the bios intro page. After ten minutes it will then progress with booting. I have tried flashing to the latest bios but the machine just hangs at the point where it asks for the file name, I cannot type anything or do anything except reboot. I can always get into the bios when starting the machine from cold. Could this be something to do with the minus temps? But many others are running exactly this config?

Thanks.

 

[ZaX]

Well I've just flashed the board to bios version 1.41 (was using a dodgy floppy before I think). Installing windows now, all seems to be OK, no more freezing screens upon rebooting.

 

[Warlord Shigs]

Hi all,

I have just upgraded my system to the following specs;

FX-55 week 44

MSI K8N Neo2 s/n 0411902223 bios 1.3

2 x 512 Gb of Twinmos winbound UTT

Mach 2

BFG 6800 Ultra OC

2 X WD 36 Gb Raptors (Sata 3 & 4)

PC Power & cooling 510 Deluxe Volt modded;

3.3v @ 3.6v

12v @ 12.6v

5v @ 5.49

My problem is that the system will often freeze upon rebooting on the bios intro page. After ten minutes it will then progress with booting. I have tried flashing to the latest bios but the machine just hangs at the point where it asks for the file name, I cannot type anything or do anything except reboot. I can always get into the bios when starting the machine from cold. Could this be something to do with the minus temps? But many others are running exactly this config?

Thanks.

use the fx55 hsf and flash ur bios and install everythin u need 2 install, thats the best thing 2 do. should always make sure everythin is workin at stock b4 u slap it under the extreme

 

[Warlord Shigs]

Well I've just flashed the board to bios version 1.41 (was using a dodgy floppy before I think). Installing windows now, all seems to be OK, no more freezing screens upon rebooting.

oh didnt c this post glad u sorted it out, lemmie kno how u get on with clockin mate