Help with a watercooling setup
- Thread starter Bobalob
- Start date
Its a good start. I might recommend a delta V3 over the supreme, but that's just my opinion. You might want to have a look at some Yate Loon 2200RPM fans and put them on a fan controller because black ices do well with high air flow.
I personally prefer Tygon hose (1/2ID 3/4OD) because it is a bit clearer and more flexible. Also, you will want between 2 and 3 metres of hose (I bought 2m for that exact case and had 15cm left over after a cpu-->res-->pump-->rad loop)
Have you included some worm drives or other hose clamping devices?
If you are going to be using that dye in distilled water (available from supermarkets for about 50p a litre), make sure to include some biocide and corrosion inhibitor.
Looks like a great setup you have there... I'm jealous
I personally prefer Tygon hose (1/2ID 3/4OD) because it is a bit clearer and more flexible. Also, you will want between 2 and 3 metres of hose (I bought 2m for that exact case and had 15cm left over after a cpu-->res-->pump-->rad loop)
Have you included some worm drives or other hose clamping devices?
If you are going to be using that dye in distilled water (available from supermarkets for about 50p a litre), make sure to include some biocide and corrosion inhibitor.
Looks like a great setup you have there... I'm jealous
£115 on Primochil Typhoon III with Speed variable MCP655,
Sub Loop 1 Cpu, thermochill PA120.2 (£45), Heatkiller V3.0 1366 (£55)
Sub Loop 2 Mobo, EK NB (£25) EK SB (£25) EK Volt Reg (£25) som time 2 volt regs required. Thermochill PA120.3 (£55)
£370 there, £50 on tubing, fittings, coolant, clips, addatives etc.
Total £420
Sub Loop 1 Cpu, thermochill PA120.2 (£45), Heatkiller V3.0 1366 (£55)
Sub Loop 2 Mobo, EK NB (£25) EK SB (£25) EK Volt Reg (£25) som time 2 volt regs required. Thermochill PA120.3 (£55)
£370 there, £50 on tubing, fittings, coolant, clips, addatives etc.
Total £420
