help needed to overclock qx9650/790i mobo

[nitsrik1976]

can anyone guide me through overclocking my setup.ive got a qx9650/asus striker 2 extreme 790i ultra/h2o'd d-tek fuzion/ocz 1333mhz 2x2gb ram hpc jobbies.ive got it stable at 4ghz but only with an fsb of 333mhz 3dmark06 19728 sli'd x2 8800gtx evga super overclocked versions.im new to all this so need careful advice on volts and how to at least up the fsb and down the multiplier.o.s is vista home premium/enermax galaxy 850watt psu.thanks in advance

 

[The Computer Council]

What clock are you wanting to achieve?

Are you stable at what you have at the moment?

 

[nitsrik1976]

yes i am stable at the moment just wanted to push the fsb a little higher but even using other cpu's etc in the past i have never been able to achieve much as i dont know exactly how to go about it and understand what voltages need increasing to maintain a higher fsb but without compromising stability.thanks for the reply

 

[ryango69]

MB settings to get to this speed

can anyone guide me through overclocking my setup.ive got a qx9650/asus striker 2 extreme 790i ultra/h2o'd d-tek fuzion/ocz 1333mhz 2x2gb ram hpc jobbies.ive got it stable at 4ghz but only with an fsb of 333mhz 3dmark06 19728 sli'd x2 8800gtx evga super overclocked versions.im new to all this so need careful advice on volts and how to at least up the fsb and down the multiplier.o.s is vista home premium/enermax galaxy 850watt psu.thanks in advance

Can you advise on the motherboard settings you changed to get to this speed ?

 

[The Computer Council]

Can you advise on the motherboard settings you changed to get to this speed ?

Indeed.

We were testing a similar setup today with the QX9650, 790i and 2 GX2s and it was blue screening at stock during the Windows install, with only the most basic BIOS settings setup.

We weren't overly impressed, so I think you're doing well with what you have achieved so far for an Nforce board.

 

[Rastalovich]

An X38 of mine did that when the pwm was busted. (including screams of pain) Ampage going through it was abnormally high, which pointed to where the fault was coming from.

Setup seemed ok until you asked it to do some work (load).

 

[breadloaf]

can anyone guide me through overclocking my setup.ive got a qx9650/asus striker 2 extreme 790i ultra/h2o'd d-tek fuzion/ocz 1333mhz 2x2gb ram hpc jobbies.ive got it stable at 4ghz but only with an fsb of 333mhz 3dmark06 19728 sli'd x2 8800gtx evga super overclocked versions.im new to all this so need careful advice on volts and how to at least up the fsb and down the multiplier.o.s is vista home premium/enermax galaxy 850watt psu.thanks in advance

I have just upgraded to the same board and chip as you

I have a tagan 900W PSU and Corsair DDR 3 9-9-9-24 memory

So far I am extremely disappointed with the board as it will just not overclock and remain stable at decent overclock percentage. I have also tried a Q6600 G0 stepping and again could not overclock past 2.8 Ghz same setup.

I have 2x XFX 8800 GTX cards also but they are not overclocked (yet)

It's a liquid cooled system so I cannot understand what the problem is, If I try anything higher than 10.5x mulipler or above the system turns off or blue screens or even fails to post

I am on BIOS 0402

Please can you post your settings and what BIOS your on

N.B. just crashed the machine again running at only 3.33Ghz so basically the mahine will not overclock at all !!

Thanks

Breadloaf