Hatmans Rig

[Hatman]

Well this is my PC build at the moment. I just ordered some new stuff such as a bay res and a smaller radiator since I dont cool enough now to warrent a triple : ) Willb e sorting out the mess when that gets here I dont see the point in sorting it out now Will also be adding a fan tot he back and probably one or two to the bottom to extract the hot air from those GPUs. After its all setup Ill be looking at lowering all voltages as much as I can and also tighter timings.

Rig contains

Q6600 @ 3.6

P5Q-E @ 1600fsb

Corsair XMS2 @ 800 5-5-5-18-2t

2x 4830 @ 625/930 idle at 40 load at 65 crossfire x

Creative soundblaster xifi gamer with 5.1 setup

24inch acer monitor and 27inc baier lcd tv

600watt stealthxtreme psu

watercooling atm is: xpsc aluminium resevoir, laing ddcpro pump, dtek-fuzion, backicestealth triple rad.

all case fans are blue led @ 40cfm rad fans are plain @ 50cfm

(is sideways ^^)

Managed to get my CPU stable at 3.6 with 1.49 volts (close to limit)

 

[atarist]

them 4 blue l.e.d.fans look sweet on the side door,

Do ther make much noise tho.? when all are runing ?

like the caes 2 in gray

 

[Hatman]

Nop they're absolutly silent : ) Theres also a blue one at the front and at the top. All my fans are completely silent its a pretty quiet rig. Even the graphics cards run at 6% fan when at idle so they make no noise.

Only fan I can hear is the power supply.

Ill get some HQ pics up when I put the new stuff in these were taken just on my phone.

 

[atarist]

Nop they're absolutly silent : ) Theres also a blue one at the front and at the top. All my fans are completely silent its a pretty quiet rig. Even the graphics cards run at 6% fan when at idle so they make no noise.

Only fan I can hear is the power supply.

Ill get some HQ pics up when I put the new stuff in these were taken just on my phone.

nice i wish my set up i have was silent i have a side fan n 2 at the back and the

noise from it you can hear it in the next room but saying that tho if its makeing

Noise at least i no that there runing in the p.c. caes under the desk lol.

 

[Hatman]

Have successfully installed the new stuff n will get pics up tomorrow. It looks a lot cleaner and temps are actually quite a bit better : )

 

[soapsupah]

cool stacker hatman, and wow A7X lol, i was playing something from them today

i wana see better your WC loop, if you can try to take a photo with some lights on, i love WC builds

 

[Hatman]

Okays will get some tomorrow : )

Its a lot different now a lot less tubesssss but so much neater lol. Tired now tho was working on it for 7h : (

1.48v @ 3.6ghz stable 25degrees idle

 

[nepas]

looks nice mate,what VID is your chip?

 

[Hatman]

1.325v which is the worsttttt vid possible I belive lol. In the B3 area even tho its a GO

Heres some more piccys of the updated rig!

^^Tidied up a lot and a lot less tubes now just need soem cable ties to sort the last few wires out : )

^^ Mess

^^How my rad is attachted is simply by 2 sets of 80mm to 120mm fan clips. It gets it a ncie distance from the case while I can simply, take it straight off. Its a bit flimsy at the moment as I didnt have any cable ties to keep them together but im getting those today and then it'll be a lot sturdier.

^^ I changed the side fan to intake air for the GPUs as thsi was on exhaust before however I added a bottom 50cfm exhaust fan with this and the combo has seemed to help my idle temps by 4 or 5 degrees and load temps by a similar amount.

^^ From what Ive read crysis should be getting a speed boost with catalyst 9.1 for quad core users. Well warhead will anyway so i hope crysis does too.. it best as with no crossfirex enabled I get 25fps lol. A testement to how poorly crysis scales even at this high resolution.

CPU Temps are also about 3 degrees cooler on average now even tho I removed my quad nozzle from the dtek. Didn't seem to be doing much good.

Generally happy with it atm : )

Will go about getting some quick benches done shortly.

 

[soapsupah]

that's trully a great rig, and the temps also good, hmm try using any rubber ties they pretty cheap and make your fan stay in their place , and i think my pc have worse cable management than yours so, i cant say anything

cya later dude, and thanks for the new photos.

Soap.

 

[Aquarius]

My Q6600 stuck at 3.3Ghz?

 

[Hatman]

My Q6600 stuck at 3.3Ghz?

Different VID's dont necesarily mean better/worse oc'ing ability altho its a general guideline.

Atm I went back to 3.4ghz at about 1.4volts. 1.5 borderline probs a bit too close for comfort. Just lowering universal voltages and stress testing each time. Temps are very good at 55 load on 5loop on intel burn test : )