display port issue

Eddie long

Member
hi all
i need a little guidance
i get a no signal message when trying to use the DP on my gtx1070 the hdmi port works fine , i been round the other forums had a quick look at whats being said , but as a newbie i,m even more confused now than i was before .
anyone have a definitive fix for this issue or even any ideas
 
i did go and buy a new cable today just in case the one supplied with monitor was u/s sorry to say made no difference , also checked what settings i have on display they all look right , well too me anyway
 
Ok the quickest way to see what the issue now is if your M/B has DP port if it does then remove the card and use the onbard if you don't have a picture then in all likley hood it's your monitor, if it works then you know the problem is most likley to be the 1070
 
thats ok im not worried with the beginers questions , yep i did change display setting on monitor ,, it reconising the display cable when i plug in but then comes straight up with no signal
 
unfortunately my mother board has no stand alone display port , but i have done the following removed graphics card , installed supplementary power to MB for graphics cards , checked for latest drivers both nividia and asus and retry'd still no display port out put but as so as i hook up hdmi display comes on , i starting to think i should stuck to a more basic build rather than blowing all my hard earned beer token building this and a few i still need to pay for
:(
i will list spec below of system i was waiting to post pictures as i was so happy with what i had achived for a newbie

corsair 780t' seasonic snow silent 1050 , asus rampage v ed 10 , ek-xlc predator 280 , intel 6850k , pioneer bdr-209, samsung m.2 961 512gig , wd black 4tb storage,corsair lpx/led 3000 32gb, asus gtx 1070 gaming (2) in sli with rog sli bridge ,betfenix 60cm rgb led strip corsair maglev 140 x 3 and corsair maglev 120 , al fans are white led
not forgetting the monitor asus mx25aq
 
Last edited by a moderator:
corsair 780t' seasonic snow silent 1050 , asus rampage v ed 10 , ek-xlc predator 280 , intel 6850k , pioneer bdr-209, samsung m.2 961 512gig , wd black 4tb storage,corsair lpx/led 3000 32gb, asus gtx 1070 gaming (2) in sli with rog sli bridge ,betfenix 60cm rgb led strip corsair maglev 140 x 3 and corsair maglev 120 , al fans are white led
not forgetting the monitor asus mx25aq

You have two 1070s? Does the other one work? (only install one at a time when checking)
 
i did try with only one installed , then i swapped them round , dp is connected too top card same as the hdmi was , i am starting to think it maybe the monitor , or i have made a silly mistake
i will retry tomorrow when home
 
Pointing more towards your monitor having issues then. If you know anyone with a DP - HDMI or DVI adaptor (depending on your monitors inputs) you could use that to check whether a signal is being output from the DP on your cards. They're not the best solution but at least it would show that it's not your cards that are the culprit. Or you may have a mini display port on a laptop that you could try.
 
i would like to thank all of you that try'd too help with me with my problem i was almost going to chuck in the towel , but went and brought a 3rd DP cable this time from a different source , we are now all working , thanks again too those who offered advice :)
 
i would like to thank all of you that try'd too help with me with my problem i was almost going to chuck in the towel , but went and brought a 3rd DP cable this time from a different source , we are now all working , thanks again too those who offered advice :)

You are welcome buddy glad you got it sorted in the end :) enjoy your rig
 
Back
Top