hi all
i currently have an i7 965 oc'd to 4ghz. it is water cooled along with the NB and idle temps are around 40c, under heavy load they reach around 60c. my wc setup is a a laing d5 vario, thermochill 120.3 rad with scythe fans. i am looking to add the GFX card to the loop, the gfx card is a single pcb gtx295. so what i want to know is what adjustments would i have to make to get good temps. would this set up be enough or would i have to add another radiator? i was thinking a of maybe using a y-splitter at the start of the loop and at the end, with one line going to the 120.3 (then to the cpu and NB) and one line going to maybe a tchill 120.2 (to buy later) and then to the gfx card.
if you have any experiance with this type of set up, any advice would be seriously appreciated. also any advice on the splitter option would be alot of help, if they allow for enough liquid through the two loops.
cheers dudes
i currently have an i7 965 oc'd to 4ghz. it is water cooled along with the NB and idle temps are around 40c, under heavy load they reach around 60c. my wc setup is a a laing d5 vario, thermochill 120.3 rad with scythe fans. i am looking to add the GFX card to the loop, the gfx card is a single pcb gtx295. so what i want to know is what adjustments would i have to make to get good temps. would this set up be enough or would i have to add another radiator? i was thinking a of maybe using a y-splitter at the start of the loop and at the end, with one line going to the 120.3 (then to the cpu and NB) and one line going to maybe a tchill 120.2 (to buy later) and then to the gfx card.
if you have any experiance with this type of set up, any advice would be seriously appreciated. also any advice on the splitter option would be alot of help, if they allow for enough liquid through the two loops.
cheers dudes
