Cooler Master 690 II Advanced + AMD 6100FX PC-Rig - (IT-Guy)

Little Upgrade for my rig:

+ 1 kit of 8GB Corsair DDR3 1866MHz CL9 Vengeance [2*4GB] @ 1600Mhz

Now i have total memory 16GB @ 1600Mhz

Next Upgrade will be:

1.Graphicscard:
Asus RADEON HD 7950 3GB DirectCU II TOP V2

and

2. Watercooling unit: Corsair H100i .

I think :)

 
In that case I can buy a new heatsink like : The Accelero Xtreme 7970
Accelero-Xtreme-7970.jpg

:lol:


I would watch out with that GPU you want, I hear some have heatsink issues.
 
I have done little bit of thinking, so to save money, I desided to buy those items:

1. Motherboard: Gigabyte Socket AM3+ GA-990FXA-UD5


4854.jpg


2. Graphics Card: Gigabyte RADEON HD 7950 3GB rev2.0

_df9c.jpg

 
Both are fine choices for PC parts. The blue on the mobo will make the blue PCB on the gigabyte card not look so out of place as well. Now you HAVE to get an FX-8320 once you find a good deal to do that board some justice x-).
 
Both are fine choices for PC parts. The blue on the mobo will make the blue PCB on the gigabyte card not look so out of place as well. Now you HAVE to get an FX-8320 once you find a good deal to do that board some justice x-).

The FX-8320 is not so bad .... I was thinking more FX-8150 or FX-8350. But Ilook the time I see, what that will deside for me.
 
When I rebuilt my PC with the new MB, then I found out that the fan header (bottom right corner), does not work :( , but this little fault did not stop my upgrade protsess :).
 
Nice system. Add an FX-8320/FX-8350 and a better GPU like a 7850 or the 7950 you posted to the mix and you'll have yourself a fine system. :)
 
Back
Top