CM Cosmos + PA120.3 = ?
- Thread starter Mushto
- Start date
coolmiester
New member
Yeah you can, this was fitting a 360GT but the same principal would apply to a Thermochill - (obviously you would need the Thermochill grill)
I know this should have been done before powder coat but it wasn't so i've had to make the best of it as its going to be on show at i33 with a whole tricked out Beast System inside so here goes.
Basically just marked the top using one of our Honey Comb Grills but due to the side bezels on the Cosmos it had to be shaved a little so they still fitted on.
So when everything was marked up just cut two small slivers off the grill and opened a 360 size hole in the top of the case.
Quick deburr with a file and test fitted the HWLabs X-Flow rad using button head screws.
The grill with be riveted into place then the rad removed and the top of the case masked and the whole lot painted matt black.
Job done and off to Beast for a system fitted :rocker:
I know this should have been done before powder coat but it wasn't so i've had to make the best of it as its going to be on show at i33 with a whole tricked out Beast System inside so here goes.
Basically just marked the top using one of our Honey Comb Grills but due to the side bezels on the Cosmos it had to be shaved a little so they still fitted on.
So when everything was marked up just cut two small slivers off the grill and opened a 360 size hole in the top of the case.
Quick deburr with a file and test fitted the HWLabs X-Flow rad using button head screws.
The grill with be riveted into place then the rad removed and the top of the case masked and the whole lot painted matt black.
Job done and off to Beast for a system fitted :rocker:
