T Toxcity New member Jul 28, 2007 #43 They say you should run it for 12 hours.. but to be honest i never have.. Ermm, It is up to you..
M mark45 New member Jul 28, 2007 #44 toxcity Toxcity how long do you recommend i run orthos for pls:worship: :worship:
T Toxcity New member Jul 28, 2007 #45 Go for 5hours. If all is well then I would be pretty sure it is stable. You can also test with 3Dmark06 or 05 and Super Pi. Quickest would be to run 32MB Super PI test. If that finishes then you are more or less certain it is stable.
Go for 5hours. If all is well then I would be pretty sure it is stable. You can also test with 3Dmark06 or 05 and Super Pi. Quickest would be to run 32MB Super PI test. If that finishes then you are more or less certain it is stable.
M mark45 New member Jul 28, 2007 #46 hi Toxcity HI all Have just run super Pi, and completed the pi test no problems thanks again for your help[ and advice :worship: :worship: :worship: :worship:
hi Toxcity HI all Have just run super Pi, and completed the pi test no problems thanks again for your help[ and advice :worship: :worship: :worship: :worship:
T Toxcity New member Jul 28, 2007 #47 Nice one! Good luck on future clocking. And your welcome, if you have anymore questions we are all here!
Nice one! Good luck on future clocking. And your welcome, if you have anymore questions we are all here!
M mark45 New member Jul 28, 2007 #48 future clocking??? surely you dont think i can get more out of this yet gain??? :yumyum:
T Toxcity New member Jul 28, 2007 #49 name='mark45' said: surely you dont think i can get more out of this yet gain??? :yumyum: Click to expand... You might be able to. Have a fiddle!
name='mark45' said: surely you dont think i can get more out of this yet gain??? :yumyum: Click to expand... You might be able to. Have a fiddle!
M mark45 New member Jul 28, 2007 #50 toxcity can you give me any pointers then pls Toxcity:worship: :worship: :worship:
T Toxcity New member Jul 28, 2007 #51 name='mark45' said: can you give me any pointers then pls Toxcity:worship: :worship: :worship: Click to expand... lol, Well whats the Voltage of the CPU at the moment? Oh, and whats the temps on the CPU?
name='mark45' said: can you give me any pointers then pls Toxcity:worship: :worship: :worship: Click to expand... lol, Well whats the Voltage of the CPU at the moment? Oh, and whats the temps on the CPU?
M mark45 New member Jul 28, 2007 #52 cpu voltage and temp Hi the cpu voltage is 1.59375, and the temp isrunning at 43 that according to the bios by the way
cpu voltage and temp Hi the cpu voltage is 1.59375, and the temp isrunning at 43 that according to the bios by the way
T Toxcity New member Jul 28, 2007 #55 name='mark45' said: how i test that Click to expand... Get the CPU to 100% usage and then check the temps. (Super PI again?) That is called the load temp. I believe that maybe 1.59375 volts is a little high.. are you still running at 3.44ghz?
name='mark45' said: how i test that Click to expand... Get the CPU to 100% usage and then check the temps. (Super PI again?) That is called the load temp. I believe that maybe 1.59375 volts is a little high.. are you still running at 3.44ghz?
M mark45 New member Jul 28, 2007 #56 hi Toxcity yep still at 3.44 and 1.59375 so how do i get the tem while that is running
T Toxcity New member Jul 28, 2007 #57 name='mark45' said: yep still at 3.44 and 1.59375 so how do i get the tem while that is running Click to expand... Speed fan.. or Core temp! I think your voltage is a little high.. have you experimented? Maybe lower it a little and do another PI test. Lower the better.
name='mark45' said: yep still at 3.44 and 1.59375 so how do i get the tem while that is running Click to expand... Speed fan.. or Core temp! I think your voltage is a little high.. have you experimented? Maybe lower it a little and do another PI test. Lower the better.
M mark45 New member Jul 28, 2007 #60 just brought down the cpu volt to 1.4 and super pi and stable temp full load 34+35 idle at 23+27 still at 3.44ghzhmmmmm
just brought down the cpu volt to 1.4 and super pi and stable temp full load 34+35 idle at 23+27 still at 3.44ghzhmmmmm
:yumyum:
