9070XT overclocking

[Meaker]

These are my latest set of values I am using for long term testing.
Here are some of my top scores:

Steel Nomad

I scored 7 412 in Steel Nomad

AMD Ryzen 7 7700, AMD Radeon RX 9070 XT x 1, 49152 MB, 64-bit Windows 11}

www.3dmark.com

Time Spy:

I scored 26 136 in Time Spy

AMD Ryzen 7 7700, AMD Radeon RX 9070 XT x 1, 49152 MB, 64-bit Windows 11}

www.3dmark.com

Time Spy Extreme:

I scored 12 584 in Time Spy Extreme

AMD Ryzen 7 7700, AMD Radeon RX 9070 XT x 1, 49152 MB, 64-bit Windows 11}

www.3dmark.com

I am seeing about 450W max draw from the wall while under games.

 

[KingNosser]

I went too 150mv undervolt but didn't feel like pushing past that myself atm i just wanted above 20k in port royal myself but i found adding any frequency did nothing i simply added 2700 on fast ram.

These cards have a lot more headroom in overclocking than most stuff lately.

You 100% want Optiscaler installed in what you can use it in with the added 2 parts it lists omg that is a handy dll swap just be sure to understand it before messing around with it.

Great cards thou only a few of us on here have them atm thou i expect it will change.

 

[Meaker]

I went too 150mv undervolt but didn't feel like pushing past that myself atm i just wanted above 20k in port royal myself but i found adding any frequency did nothing i simply added 2700 on fast ram.

These cards have a lot more headroom in overclocking than most stuff lately.

You 100% want Optiscaler installed in what you can use it in with the added 2 parts it lists omg that is a handy dll swap just be sure to understand it before messing around with it.

Great cards thou only a few of us on here have them atm thou i expect it will change.

Is yours one of the higher TDP models?

 

[KingNosser]

I’ve the gigabyte gaming oc it has 3x8pins but it only goes too 365watts so if a 2x8pin does then not a huge difference thou has vapour chamber.

 

[Meaker]

I’ve the gigabyte gaming oc it has 3x8pins but it only goes too 365watts so if a 2x8pin does then not a huge difference thou has vapour chamber.

So you have a 25W headroom over me and probably a slightly better binned chip.

It's just a basic copper cold plate on the Reaper (image courtesy of squarkingcrow on ocuk forums).

 

[KingNosser]

Well it goes to 200mv but adding frequency literally doesn’t increase my clocks i end up with lower than stock by adding an offset which is odd as getting 3300mhz plus only happens with under voltage.

So im hoping the next batch of drivers solves the overclocking but temp wise my card is crazy as even at 3300mhz and 2700mem with 10% it doesn’t go over 70c when undervolting but 3dmark certainly sees it differently as in that it states 45c the vapour chamber is good.

Watch debaurs video on it recently is only reason i got upto them clocks but there is more to give ive heard so higher clocks on reddit by a chunk

 

[robbiec]

+500Mhz for gpu speed, -70 for volage, Ram @ 2640 (fast timings)