OC3D Forums

OC3D Forums (https://forum.overclock3d.net/index.php)
-   Overclocking (https://forum.overclock3d.net/forumdisplay.php?f=88)
-   -   Loose boot drive on ryzen overclock. (https://forum.overclock3d.net/showthread.php?t=79919)

Starfire 11-03-17 01:07 AM

Loose boot drive on ryzen overclock.
 
I have a EVO 850, which I believe is SATA not PCI, and whenever I up base clock I loose the EVO in the boot options. I'd understand if it was pci, but being sata I didn't think that would happen, ideas?

I'm using a Crosshairs VI BTW

Seikusa 08-05-17 05:22 PM

Same Issue, except my bootdrive is a non-EVO.
Seems to mostly to happen when I access my BIOS before Booting. But It will boot most of the time with a 39 multiplier and standart baseclock.

NeverBackDown 08-05-17 05:54 PM

You guys update the BIOS?

Celt 14-05-17 06:50 AM

I have not had an issue with my SSD (960 EVO), but my sound card is sensitive to BCLK hikes. I tested from 101 frequency and upped a notch at a time to find what it would tolerate.

Davva2004 14-05-17 09:16 PM

Ryzen is proper flaky on BCLK overclocking, I'd leave the BCLK alone so that everything works as it should and overclock the CPU via the multiplier, you can use quarter multimpler values to fine tune the overclock.

tinytomlogan 15-05-17 09:06 AM

Quote:

Originally Posted by Celt (Post 946555)
I have not had an issue with my SSD (960 EVO), but my sound card is sensitive to BCLK hikes. I tested from 101 frequency and upped a notch at a time to find what it would tolerate.


Is it a PCIE sound card? BCLK overclocks the PCIE too.....

Celt 15-05-17 10:27 PM

Quote:

Originally Posted by tinytomlogan (Post 946620)
Is it a PCIE sound card? BCLK overclocks the PCIE too.....

Yes, it is an Essence STX PCIE, hence with a BCLK of around 112, I lose it. Right now I am using a BCLK of 108, CPU at 3968.9 GHz memory at 3455.8MHz with 14-14-14-34.

I'm also using P-states in conjunction with elmor's Zenstates - which is a great tool for P-states within Windows. Everything else set in bios.

tinytomlogan 16-05-17 07:09 AM

Quote:

Originally Posted by Celt (Post 946763)
Yes, it is an Essence STX PCIE, hence with a BCLK of around 112, I lose it. Right now I am using a BCLK of 108, CPU at 3968.9 GHz memory at 3455.8MHz with 14-14-14-34.

I'm also using P-states in conjunction with elmor's Zenstates - which is a great tool for P-states within Windows. Everything else set in bios.


At least you know why its happening. Ive heard people saying high BCLK has nuked M.2's

Ive not had any issues with mine yet though


All times are GMT. The time now is 09:03 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.