Recent content by Yeungster

  1. Y

    Multiple Powerline Adaptors

    I know, I know. I hang my head in shame for using Powerline adapters but they are the best choice I have at the moment. Just wondering whether anyone has any experience with running multiple Powerline adapters in the same house. Can you mix and match adapter brands? Can you use a single...
  2. Y

    TTL - Blast from the past

    Hi Tom, Just dug out my old rig and look what I found. Remember this? :D:cool::cool:
  3. Y

    BF2 & 2142 (Post GameSpy)

    Anyone playing this? BF2 & BF2142 Revive Project https://battlelog.co/
  4. Y

    Computer/PC Stores Around Bristol?

    I'll be making my annual trip out of Cornwall next week:p and headed to Bristol. Just wondering whether there were any reputable retailers in or around the area where I can try out a few bits of PC hardware and maybe buy something? Things like decent GPUs or mechanical keyboards etc?
  5. Y

    New Build - On a Budget

    Hi Guys, I've not long finished my current build but my friend will be returning home from 3 years in hospital in the near future and that means I will need a rig to leave at her house as I'll be a primary carer for her when I'm not at work too. I was hoping to re-use as many components as...
  6. Y

    No Core Voltage Displayed

    Hi Have any of you had an issue where your CPU voltage is no longer being reported through to CPU-Z or HWMonitor? I went back to over clocking last night and manually set my CPU Voltage etc but since then these applications either report 0 (HWMonitor) or the option is greyed out (CPU-Z). I've...
  7. Y

    Schiit DAC & Amp

    Hi guys, Just finished my new build and ditched the Auzentech Prelude for onboard audio but it sounds flat. I'm currently running Asus Z170-Deluxe onboard sound, SP2500 speakers, not using a decent set of headphones at present (recommendations welcome). I was originally looking for a dedicated...
  8. Y

    Reusing Old PSU

    Hi guys, I'm in the process of building a new rig but reusing a couple of old components as I feel they may be still OK. Proposed spec: Intel 4790k Asus Z97 Deluxe \USB 3.1 16GB Corsair Dominator Platinum Crucial BX100 500GB SSD Corsair H110i GT AIO Corsair 750D Currently planning on keeping...
  9. Y

    Upgrade Soundcard for Corsair SP2500?

    I have lived behind a rock for a long time and finally decided to dig out my Auzentech Prelude soundcard for my current rig after packing it away after the "snap crackle and pop" issues I had with the old chipset on my original rig. My listening experience has massively improved already but I...
  10. Y

    Windows 7 E and N Variants

    Apologies if this has been discussed before (I'm sure it has) but does anyone know the differences between the Win 7 'E' and 'N' editions as listed HERE? Planning on pre-ordering but wanted to make sure that I wasn't buying the wrong edition. Comparison table shows no differences between them...
  11. Y

    Which 4850?

    My x1900xt has finally given up the ghost, and i'm not willing to spend a huge amount of money on a replacement card considering nahalem is out soon as well as some very tasty cards (4870x2 etc). I've decided to go for the 4850 as I believe this offers the best bang for buck. I know the cooler...
  12. Y

    X1900XT Cooler Options

    As I'm stuck with the Sapphire X1900XT now for a while, I automatically assumed the Accelero X2 would be the perfect aftermarket cooling solution. I have recently read that a lot of people are complaining about how the cooler doesn't vent and how the cooler and ramsinks are stuck on like...
  13. Y

    Which Fuzion Nozzle?

    I am running an old AMD Opteron 170 dual core, and wanted to know which D-Tek Fuzion Nozzle would be best to use. I have read a review thread on the nozzle kit where they say that just using the washer gave very good cooling advantages over stock. Most reviews, as expected, are based on Intel...
  14. Y

    Cases & Inverted Mobo Placement

    I was flicking through some of the project logs (both on here and wcuk forums) and have noticed that a lot of you are going for cases where they reverse the motherboard into an inverted position. I know that heatpipes do not like this type of positioning, but was wondering whether this limited...
  15. Y

    WC Advice / Opinions

    I'm getting ready to re-do my loop, but was wondering what you opinions would be on: 1) Inline temperature probes - Worth it or not? Is the additional restriction worth the hassle of knowing your water temperature? Is the restriction significant? 2) Changing my current Swiftech MCP-655 for a...
Back
Top