Recent content by Rasmus66

This i how a proper volt mod should be done:lol: 8800GTX with double evga epower board:D Besides looking like a beast it now has no cold bug:)

Benchteam Introductions - Rasmus66 Real name : Rasmus Laursen Forum name : Rasmus66 D.O.B. : 10/07/1991 Age : 21 A little bit about me: My name is Rasmus and live a few kilometers outside a town called Silkeborg in the heart of Jutland in Denmark. I work as an apprentice in small company...

Hi Started folding for team 98860 about a week ago But i have some problems now. I use the gpu tracker v2 software and been using my 2600K and a HD4870 so fare for folding. Added a old 8800GTS 320 MB gfx to the system here this morning but it is not working. Gpu tracker just gives a error...

Lets make this one a sticky so people easily can find volt mods I will update this thread with volt mod pics, guides and other ways to mod your cards. 8800GTS 320/640, 8800GTX and ultra voltmods Vddr mod: Original voltage 1.81V Solder vr from red point to ground. Tune down to increase...

Took the long drive down to my bench mate with my card loaded with new hardware, 20 kg dice and my friends new single stage compressor. He had bought a X79 setup with a 3930K cpu and Rampage IV Extreme motherboard that i had picked up for him. And what a sweet board it is If you are going...

AndreYang found a golden chip and has beaten the old cpu-z WR with 31 MHz using only liquid nitrogen to cool the cpu http://valid.canardpc.com/show_oc.php?id=2067001 Source: http://kingpincooling.com/forum/showthread.php?t=1479

Motherboard insulation is a big topic with a lots of different opinions to how to do it the right way. This is just a little short guide to how i like to do it. What you need is a spray can with plastic paint. Clear nail polish can also be used. The motherboard i will spray paint today is...

New competition from MSI and HWBot. http://hwbot.org/competition/msi_return_celeron/ Should be a fun/cheap oc challenge for everyone with a MSI LGA1155 motherboard. It starts 10. October and ends 6. November

Bought a very cheap Mushkin Redline 1600 CL6 3x2 gb kit a few weeks ago and finally got the time to test it. Superpi 32M 2000 MHz 6-9-6-24-82 1T 1,73 volt The highest clock i've reached on this kit so fare is 2100 MHz CL6 but it's not stable for 32M. Might have to prepare the ram pot for...

Cleaning time for my R3E board. It was getting pretty diry after all the bench sessions so i decided to do something about it. pics before cleaning. Bath is ready Like new again and with a nice fruit fragrances I had to clean inside the socket to. First boot after it...

Did some testing on my I7 970 this just to see how good it is. Turns out that this is one killer A0 chip that just scale with cold and not vcore. http://valid.canardpc.com/show_oc.php?id=1758435 It will do 5 ghz at 1,5 volt for benchmark testing And on dice it will do allmost 5,9 ghz...

Hi Guys Just wanted to show you some pictures of my latest project i have been working on. It's a half copper and half POM ln2 pot. Total Weight of the pot is about 1,4 kg. For making the copper bottom of the pot i used a very handy "little" tool we have were im working A 3 axis cnc...