Recent content by [O-CuK]Marci

For an installation guide for TECs on your CPU using a Maze4-1 block, see HERE The pic above shows the average pelt in action kinda thang... As the guys above have said, it's basically a grid of metal conductors that move electrons from one side of the device to the other. One side gets...

Well, with the new PA Series rads finally getting sorted, figured may as well do a comparison of HE120.3 vs PA120.3 with the same fans... to do so required some monitoring tools in the form of the mCubed T-Balancer and some handiwork with silicon... thus giving me liquid in and out temps... and...

Good comparative testing of the popular pump choices out there at the mo: Full Details: http://www.xtremesystems.org/forums/showthread.php?t=110402 More comparisons, this time concentrating on the DDC only with the plethora of available tops and configurations...

This is another one of those "Myth's of Watercooling" articles... basically dispelling the myth that singlepass is best when it comes to radiators... Here's the best chunk of txt around that describes why singlepass is generally beaten by dualpass in today's rads, and also why the...

Replicated from Cathar's Original Post here: http://www.xtremesystems.org/forums/showthread.php?t=147767 ======================================================= I've been working on a wholistic guide to designing a water-cooling system of late. Using a mix of real-world test data, and...

Source: Nikhsub1 - http://www.xtremesystems.org/forums/showthread.php?t=151781

A good waterkit is designed from the ground up to match the requirements of the system that it's cooling. This means you need to know what heatload you need to cool, and then need to know what minimum spec is required to cool that heatload. This l'il guide gives you a very rough guide on how to...

http://www.ectforums.com/viewtopic.php?p=508#508 Please let us know whether your board can or can't read temps below 0 IN THE BIOS! If bios revision affected your boards ability to display - temps, let us know the bios required as well!

As we're all aware, the new ThermoChill PA160 rad doesn't conform to previous "standard" dimensions of Built-for-PC Watercooling Radiators. In fact, it's a tad large... HOWEVER... it's size was partially chosen as more or less every case on the market is 160mm wide or more, so either way it...

As some of you may know, Over-Clock UK Ltd have now joined forces (financially taken over) TheFragFactory. This move was basically to relieve some of the financial burden of running the events from the shoulders of TheFragFactory's staff. Now that O-CuK has taken TFF under it's wing, we're on...

The next FragFactory LANParty is on 15/16 January at their usual venue in Cudworth, Barnsley. Hit their website for more info.... www.thefragfactory.co.uk

As you can see from the shot above, this is a Beantech FullTower Plexi case fitted with Watercooling, additional 12v TEC PSU relayed to the Prometeia MkII mounted in the custom hand-built plexi base. Mounted in the top of the chassis are 2x HE120.1 radiators and a DangerDen Clear...

"There's always one part of a system that lets down all the rest. It's a common thing... However, many fail to acknowledge that it's their PSU. The PSU market at the moment is hazy at best, with half the supposed 500w+ PSUs only outputting 430w in real-life... drastically under-rated ampages for...

Wotcha folks... been chattin with Phil for a few days and was asked if I could post some pics of a naked prommi... Well, there is only one bit that needs showing as everything else is visible in the base box... & that's the ThermalBus Assembly. The thick black hose that leaves the basebox and...