X800 PCI-E Pencil MoD

[Animal]

Anyone here dun it yet...?

 

[fatty]

Should be the same as the standard x800 pencil mod??

 

[Firelord]

I've done the Vgpu mod on my X800 and with an extra 0.2v gave me an extra 55mhz on the core

 

[Animal]

Ive Penciled down the R1597 so instead of reading 431ohm it read 408 but when i go and test to see if my vcore has raised from the standard 1.41 it hasnt..

wat can i do..?

 

[Animal]

Anyone that has any ideas plz add me on msn..

xAnimalx@msn.com

thx

 

[Animal]

The blue chip read 4.31ohm and ive penciled it down to 4.08 yet the vcore has stayed the same.. 1.41.. wat am i doing wrong.. is this the wrong one im doing..?

Sorry for the poor quality..

My Board

Asus board...

Red and Blue are the same as the pic above...

Orange are where there are no chips..

 

[Wingz]

this might help...

http://www.rojakpot.com/default.aspx?location=3&var1=166&var2=0http://www.rojakpot.com/default.aspx?location=3&var1=166&var2=0

 

[Thickbrit]

Gimme a shout on msn mate.

 

[Animal]

Forgot to say that i got it all workin..

Big thx to Thickbrit !!

 

[bobmanfoo]

hey animal, how did you do it? i have a x850xt pe and can't seem to get the mod working, i tried on the resistor you showed above, tia

 

[Animal]

Imanaged to get it workin but ended up soldering it as i didnt like the pencil mod in the end..

as for the 850 tbh i doubt its the same as the 800.. will have a look into it 4 u

 

[bobmanfoo]

thanks a bunch, ill try to get pic of my card up soon

 

[Animal]

Yep if u post a pic of the bak of the card with detailed close ups.. i should be able to tell u where i needs to be dun.

 

[Animal]

Herer are the reading points...

by the looks of it, its the same point on these cards as the x800 for vmodding.

 

[bobmanfoo]

i have an x850xt pe as well, i have pictures posted here http://www.ocforums.com/showthread.php?p=3473420#post3473420, thanks

 

[dillingerdan]

i have an x850xt pe as well, i have pictures posted here http://www.ocforums.com/showthread.php?p=3473420#post3473420[/url'], thanks

Someone already replied to that thread before you posted pics.

There are pics here:

[url]http://www.ocforums.com/showthread.php?p=3473420#post3473420

 

[bobmanfoo]

you referring to the techpowerup! guide? i tried it and it doesn't work

 

[dillingerdan]

you referring to the techpowerup! guide? i tried it and it doesn't work

Yeah I was referring to that. I can't see how it wouldn't work unless you did it wrong. Every single X850 PCIe is made by Sapphire so they have the same PCB so it should definitely work. Try again is my suggestion.

 

[Animal]

Pencil between these points..

 

[bobmanfoo]

tried that again and it didn't work