Windows 10 - old problem with automatic repair - can be UEFI MBR conflict?

Status
Not open for further replies.
Hello. So this is my next topic but i am almost sure where is the problem. My ssd is Samsung Evo 250 GB.
At beggining time ,disk was formatted to MBR partition.
Problem started when some day i finished test in memtest86. Then after finished test i change booting priority in UEFI from USB to SSD.
After this Windows 10 started showing at 1 boot Automatic Repair and Diagnosing Pc. Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc.
Then after this i get screen with Your pc did not start correctly or Automatic Repair couldnt repair your pc . And when i click restart then Windows 10 boot fine. So i was needed 2 boots to boot properly to windows.
Disk was still on MBR partition.
Then i formatted disk using this time GPT partition. After this no problem with automatic repair, even if i am changing booting priority from USB to SSD ( tried many times ). Problem is not reproducable now.
So question is. It was propably issue with MBR and my UEFI ? MBR is not compatible with UEFI? Or maybe cause was other?

My ssd is Samsung Evo 250 GB , motherboard is Asus Sabertooth Z97 Mark 2, rams are 2x8gb Kingston Hyperx 1600mhz. Or maybe rams? I have read that some peoples resolved issue by new rams. But i doubt that rams was issue, because after format is now fine. What you think ?:) Thank you.
 
Problem is not reproducable now.

The fact that these are your own words should tell you that it was a random one time occurrence. Some things happen once, then never again. These single time events are a pain but mean NOTHING! Let it go before something genuine happens, then when you need help, everyone will ignore you.

Now go and enjoy your fully working PC, stop trying to make it crash.
 
The fact that these are your own words should tell you that it was a random one time occurrence. Some things happen once, then never again. These single time events are a pain but mean NOTHING! Let it go before something genuine happens, then when you need help, everyone will ignore you.

Now go and enjoy your fully working PC, stop trying to make it crash.

This right here.

ok i just ask to want be sure about MBR and UEFI .

If you keep making threads about a similar issues, It will come to a point where NO ONE will give you any advice cause people will start to think you're a TROLL.
 
Last edited:
Last question. Somebody said to me :"I would suspect that your memory is still not stable and is randomly corrupting your disk reads or writes, causing the repair loop and other problems" . So it was related to memory in my situation or not necessary? Memtest86 not showing errors.
 
And this has now happened, your clearly not listening to reason.

^this. I can't help you anymore, you have been told many times but you just don't listen. Sadly I now find your just trolling us. Hopefully your "someone" can help you now.
 
Listen last time.


Problem started after i change in my UEFI boot priority (but on past it working fine ) from :"UEFI USB KINGSTON" to "P1 SSD SAMSUNG EVO 250 GB".
So it was reboots twice and then get's through. Weird. On first reboot was Automatic Repair , and on second reboot it was get through to Windows without problem. Event viewer showing that system was not closed properly. Any ideas why it shows that?
 
Status
Not open for further replies.
Back
Top