[Scratch Build] Specced ITX 1.0

Gurt11

New member
Hi,

My name is ‘Gurt11’ or Geert, as my parents called me. I live in Belgium and I’ve been building computers and gradually advancing in modding-territories for some years now. As I have now turned 24, graduated from uni and am about to make steps to build a life of my own, I thought it would be nice to do one more mod. But it had to be a special one. Again something I hadn’t done before. I introduce you to my Specced ITX case.

SPECCED ITX 1.0

The idea of the build was to make everything smaller, but not to lose performance or cooling capabilities. I come from a Corsair 600T, which you’ll see soon as a proper goodbye was in order. I have some dremeling experience, I know what a file is, and most important: I took quite some time (at least half a year *-)) to come up with a design for a case that was 1) possible to make myself, without any fancy machinery , and 2) could fit everything I wanted it to.

Features:

- ITX motherboard
- Full sized graphics card
- ATX PSU
- Watercooling: 360mm rad + 120mm rad.

Every mod begins with old fashioned pen and paper!

AI5koPC.jpg


A basic SketchUp soon followed:

Lq0mhB7.png


Measurements: 260mm (W) x 425mm (L) x 276mm (H) (double front included, feet excluded)

The mind is made up, the marks are drawn, the wallet is (/was) full(-ish). Let’s GO!
Materials out of which it will be constructed:

- Aluminium.
- Plexi.
- Something that should resemble wood. (veneer was the first idea)
- Glass.

Saying goodbye to my trusty 600T. You have been of use for long enough!

AyQadH4.jpg
zCAPSHq.jpg
 
Subbed - I do like these small builds. I find them quite frustrating to do though. Small dexterous hands are a distinct advantage - which I don't have.:(
 
Subbed - I do like these small builds. I find them quite frustrating to do though. Small dexterous hands are a distinct advantage - which I don't have.:(

With enough time and effort, I'm sure you could pull it off too ;) my hands aren't exactly small either :p

__________________


The midplate

From a designers point of view, I wanted the motherboard tray to be lit up from behind or from underneath. This meant it cannot be made of aluminium. I could have made an acrylic midplate myself, but I had no idea how to make the correct holes for the motherboard stand-offs and had no idea at which distance from the back they should be positioned for the I/O panel to sit flush with the back side.

That being said, I wanted to thank PARVUM Systems for the assistance in making this sublime white acrylic midplate. That they were able to produce a quality piece like this from the drawings and measurements I gave them, still amazes me. Thank you!

bs7zxiB.jpg


One of those second hand deals of a lifetime:

KyuMofs.jpg


4WXYzu7.jpg


BKrR4VJ.jpg


h0XPT7H.jpg


Paired withan Intel i5 4690K, another second hand deal, can’t go wrong:

oshivAZ.jpg
JwHRqVV.jpg


The good old XSPC Raystorm block:

i6uDpdY.jpg




More importantly! The aluminium arrived from https://www.aluminiumopmaatgemaakt.be/, a Dutch company that delivers plain aluminium cut to size and bent in basic shapes.

I regret to announce however that I lost some photos from the aluminium somewhere along the way. The following is a picture from how the panels should come together:

iY4fJeT.jpg


As you can maybe tell it consists of 7 different pieces:

- 2 L-shapes that form the sides and double front.
- 2 rectangular pieces for top and bottom.
- 1 rectangular piece for the back.
- 1 L-shape for a radiator at the front.
- 1 U-shape to cover the bottom radiator.

Measurements: 260mm (W) x 425mm (L) x 276mm (H) (double front included, feet excluded)

As the sharp-eyed may have noticed: the panels didn’t arrive in perfect condition. As you can see from above, the big L-shapes for the sides didn’t have a perfect 90° angle. Maybe this happened during transport, maybe it just wasn’t done properly or maybe I handled it with too little care on unboxing. Anyway, it got fixed with some brute force and the edge of a table.

JV2qr9z.jpg


Something else, which I can’t just fix: the top left corner of one of the L-shapes was damaged. (as seen above and below more clearly) This definitely wasn’t my own doing. Transportation went a little rough I guess.

AO1vx8q.jpg


All this aluminium will be held together with MODDING CUBES from Parvum. These little things are simply wonderful.

az0gUp2.jpg


Things that need doing:

- DRILL all screw-holes in the right positions.
- SINK those screw holes with a sink-bit.
- TAP all holes to fit regular M3 screws.
- Cut out fans holes, windows, front, I/O, PSU , …



Some notes on some tools and bits and bobs I got!

This is a tap and die set that I got in one of your regular hobby and tool shops.

Uwcqo4t.jpg


All was fine at the start. I mostly needed the M3 (the smallest) of the tap bits. Those taps fit in a holder that you can see here:

A3r08oD.jpg


Unfortunately, no matter in what way you put the tap in, after a while the points that touch the tap started hollowing out because of the force put on the whole thing when tapping. My guess this happened because of the small size of the M3 tap bit and possibly also just not top quality material. Maybe you can see what I mean in the following pics:

C7RYpUo.jpg


9x0jdnF.jpg


To solve this issue, I came across a better mechanism to tap. Message to anyone ever in need of something to tap threads: GET THIS STRAIGHT AWAY! The tap bits fit in by compression. Tapping will be much easier also because of the way this tool works. (I can’t find the English name for this tool anymore. Help? :))

K6vxphm.jpg


awxKjNL.jpg


Another very nice drill bit is this thingy. Meant to sink drilled holes so that bolt heads align flat with the surface. And ofcourse M3, M4 and M5 drill bits used for this project.

hk0eJ07.jpg
vYv49RR.jpg


I also got some of these round things. An M3 bolts fits inside and makes it pretty. Ofcourse sinking holes is useless when using these. I yet had to make up my mind on if and where I was going to use these.

6uPmhjE.jpg


rbCFacR.jpg
 
Nicely done fella, all the prep and thought gone into the fittings is honorable I like it muchly :)
 
Measure, draw, measure again, draw some more, change your mind, do it all over again and drill!

OvQQGmP.jpg


Again, I somehow lost a bunch of pictures from my camera from while I was working on the aluminium.
These phone pictures will have to do :(

First I did the bottom plate, radiator cut-outs and corners for the back.

qgdoCcf.jpg


Fitted the midplate and one side to the bottom and the back

Yt7mXVd.jpg


Bottom radiator cover

bPNkmXu.jpg


And front radiator cover

DJeYIS4.jpg


With the other panels put loosely in place, it should look something like this from the back:

avUGmO7.jpg


7wly3IG.jpg


Mind you that at this point I had occupied the (old) kitchen table for several weeks. I still dream of my own place to work :3

NOTE: it became clear at this point that using hexagon-head bolts (those which you can screw in using an allen key) is NOT a good idea. Some of the bolts need a little force to be put in place, which was bad news for the heads: once you put too much force on your allen key, you risk carving out some of the bolts head, which then makes it even more difficult to screw in further or even out again. At this point I switched to phillips head bolts. Saved my life.

NOTE 2: I also experimented (on a test piece, before these cuttings and drillings) with giving the aluminium a brushed effect. I did this using sandpaper, attaching the alu to a workbench and go over and over again with sandpaper. From coarser grits to finer grits. (100 – 240 – 320) It sure looked nice, and the original plan was to get the panels anodized in black, which would have meant the brushing would have still been visible. HOWEVER, I decided, in deliberation with my bank account, that the cost of having it anodized professionally wasn’t worth it considering my work on its own also isn’t as perfect as I wanted it to be. Drilling and cutting by hand, means making mistakes and having to adapt to even a millimeter gone wrong. Not that these little signs of a handmade case are that visible, but I know they’re there and thus in my mind the cost of anodizing isn’t justified.
 
Delivery by Highflow. Thanks guys! ^^

DkVPeJ1.jpg


Bitspower and alphacool fittings, PETG tubing by Nanoxia, tube reamer; Silverstone 120mm fan filters, case feet by Lian Li, Leds by Phobya and some 7v adapters.

u5cFJFf.jpg


Delicious fittings.
These are the ones that are going to be visible. In the back compartment of the case, I'm going to use flexible tube with Monsoon fittings that I still have from the previous build.

zHvTvsL.jpg


JgpwkAr.jpg


Y5Ij2Sk.jpg


Thanks to the video Peter Brands made (L3p) I went for this tubing. Looks nice :)

jIEkgK2.jpg


kK2iuL6.jpg


Silverstone fan filters. As you can see, the mesh on these is extremely fine. Plus they're magnetic. Not that I'll use that feature, but it's nice anyway :p

r8qv6x1.jpg


37h7Ma3.jpg


And to lift it all up, some aluminium feet by Lian Li. Very nice quality, surprisingly heavy too.

DmHJTyJ.jpg
 
Update on the case!

It closes :3

37K4je2.jpg


op2uZeS.jpg


On with the radiator cover then. Went with this design, hopefully going to look good with leds underneath.

poIA1h9.jpg


GJvcIkr.jpg


Did the front radiator cover the same way, and tadaaa

d2opU7Y.jpg


ldvjCtS.jpg


tdG6BS0.jpg


On with this back side then. Motherboard I/O plate and PSU have to fit snugly.

Hm62bSy.jpg


BS0c7Rx.jpg


RoCoDYn.jpg


Nice.
Then did the front, which you can see here standing on top of everything.

RpVUqmf.jpg


This little radiator

K8whpfZ.jpg


Goes right here

4doVNVF.jpg


No roof without a window

j8zKxlA.jpg


0ms52rc.jpg


LdTQiqA.jpg
 
Next update. Very nearly there!

Cut out the side window. Nice and big, no tralala or poespas as we say.

8gSEifC.jpg


Top view

EUUCEPB.jpg


Front view

EpDhUa5.jpg


Exploded view. Made a little cut out there in the front for the front fan to suck air through.

SXOY7ka.jpg


Open back view

F2oAyLj.jpg


Last thing to be cut was this hole for the PSU fan to let it have some air. OCD much.

Z8Rkkf5.jpg


So then… These raw pieces need painting. So I prepped the garage, Dexter style :3

xRm5r0m.jpg


YizDYal.jpg


tZdsjNe.jpg
 
To say I'm impressed is an understatement! it's a thing of shear nerdvana! I honestly can not wait to see the case once painted.
 
Update!

All panels were prepped and primed.

TqPlxFn.jpg


And hung very handily from an old curtain rail with some chicken fence wire :p

1BysfVg.jpg


Little by little, nice and easy, careful not to cause dripping …

Vkp1wHv.jpg


OB2trCd.jpg


Et voilà! A couple days later this was the result. Fairly happy with it :)

1lUVQ5O.jpg


8TcDEqV.jpg


After which I wrapped the radiator covers with DC-Fix (normally for furniture or window panes). Very sticky and several nice wood finishes to choose from. I went with this walnut look…

m5o1aOJ.jpg


Stuck it on first and then cut out the ‘ventilation lines’ and fitting holes. On the table (result below). On these feet it shall now be build!

zJVNPx9.jpg
 
Update!

So I began at the bottom, where after fitting the feet I noticed I had to fix the radiator first, because the feet cover some screws for the rad. Talking about close…

r1ib4lH.jpg


So after attaching bottom rad and fan filters, the feet could go on.

MwZzxVv.jpg


And boom. Alphacool ST30 360mm rad in place.

Es6oeSV.jpg


Fans on. Cover on.

L9ESZ6V.jpg


Midplate on.

r8l4lDe.jpg


That’s a Parvum fan you see peeping here. All fans will be running with 7v adapters. Didn’t want more cables visible (going to the motherboard) then necessary.

utx9SsG.jpg


oozc6LT.jpg


A blacky going in the front.

i3ImpGv.jpg


On an alphacool ST30 120mm rad, attached to the front radiator cover. I didn’t attach it to the front of the case itself (to the big L-shaped piece) because then it would get really hard to access the back. In the way I’m doing it now, I can just take all sides off without having to take anything from the computer or watercooling apart.

6etQA4g.jpg


ZByMAiI.jpg


IYqNz6p.jpg


Motherboard on. Fittings from the front rad were in place when putting in the rad.

PKl9w5k.jpg


Those other four holes will have pass through fittings that go to pump, reservoir and via-via to bottom rad.

N33J9JM.jpg


At this point I took everything apart again to put the LEDS in. *Scatterbrain*
One white LED strip goes between the bottom rad cover and midplate. Kept a perfect 1cm space. And one red LED strip goes underneath the bottom rad cover.

9q9lLAA.jpg
 
Last edited:
Part 2 of todays update.

Back to it then!

w0uNwqU.jpg


I can look at this all day long.

qdpsrWQ.jpg


RhvX6jk.jpg


Cover its rear side. Oh yeah, I cut some lines out here as well, hoping it might let some air out.

khBLgoc.jpg


GPU on.

ZRiSdKy.jpg


P6RcKsJ.jpg


uyTBRFd.jpg


The business compartment. Gonna be tight.

6EKsUqS.jpg


My good old memory sticks. Still going to have to serve me some in this build. Can’t afford some nice Dominator Platinums yet.

vfA6Q6B.jpg


wIP3uCF.jpg


Watercool everything!

o7BjF3A.jpg
 
There doesnt seem to be a lot of ventilation for those rads :/ does look good though!

That might become a problem indeed. I'm willing to sacrifice some cooling performance to keep things the way they look, but I'll just have to see what kind of heat the end result produces.

nice build, nice touch with the wood wrap. looking forward to seeing some epic finished shots!

Thanks! Oh and there will be. A friend who's more professionally involved with photography agreed on taking our (his, a friend and mine) rigs to the studio :cool:
 
the way i see it for now, most of the heat will just hang around the rad because it cant get away, i'm curious for the cooling details once its rolling
 
UDPATE!

One of the lastest, I promise.

So at the back things will be connected using flexy tube. Not very interesting?

WptSSE6.jpg


The front looks far more interesting!

aWzUfrW.jpg


My first bends ever using acrylic tubing. This is the PETG stuff supplied by Nanoxia.

nuLOUR8.jpg


Complex, I tell you! It’s bending, fitting, dremeling a little off, deburring, fitting again, maybe take a new piece and bend again, … Luckily I never needed to do a bend more than twice.

s0mG03w.jpg


These are going in …

gNpxOlz.jpg


One little bend.

4oRq8gv.jpg


Boom.

YKEOS3d.jpg


hAiH6ZU.jpg


zb56MD8.jpg


2u1Ln4B.jpg


8jQpsrX.jpg


piWp7JR.jpg


Time to fill up and see if this kind of tubing and fitting actually holds the water in…

Vne3Mxq.jpg


One can never be too careful…

ci7tkLW.jpg


Luckily everything went ok. Little tightening here and there and I was golden. Or red actually...

0ZN7XIU.jpg


qKAiwpA.jpg


And I’m gonna leave you with this backside shot of some lighting … :3

dhXlXDg.jpg
 
Back
Top