Sabranco Humvee

Ace_finland

New member
Sabranco Humvee Video from CES added

Hi evryone

Long time since I've been online but back now with a fairly quick mod. Seems like life have been getting in the way of my hobbies. Been hard at work on fixing up my garage so i can do more modding in a nicer place
Newgarage_zpsecca4e72.jpg


A while ago i got contacted and offered to do a computer mod with some new parts and even if i don't have a lot of spare time it seemed like a fun idea.

The idea was to make a mod with the new Asus Sabranco board in a Hummer. Took me a long time to find a hummer that would fit a full size motherboard.

Components.
Asus Sabertooth mark S
Intel 4690
Intel SSD
Cooler Master Nepton cooler
Asus Strix GTX 980
Kingston fury ram 32gb, 2 white and 2 black



Only spent half an hour on the hummer shell so it's not all there
1_zpse9f62b6d.jpg



After a few weeks i found one in Taiwan that was big enough.

1/6th scale
Arrived_zpsa0295969.jpg

Beer can for scale
Hummerarrived_zpsdd7904ec.jpg

Body removed
2014-10-09180650_zpse9253746.jpg


The board, i like it
89a170d3-6f7d-404a-8a0a-49aee6adad5a_zps38bf17e1.jpg


The PSU, have had a few of these and they have always worked good, so why not another one
DSC_0030_zpsf8c642dd.jpg

I was in such a rush i forgot to take pics of the GPU but i will post a bit later of the finished gpu.

On to the modding
Had to remove a lot of the electronics in order to fit all the parts. Would have been nice to have it drivable but prefer it to look nice in the end.

First up the a tray for the psu. Milled it out of polycarbonate. Was a bit tricky to find a good spot for it but in the end it sorted itself out. Only need 4 holes but added a few more for flexibility in case i want to move it a bit
PSUholder_zps4383063b.jpg


Acrylic support for the SSD.
Intelssd_zps732c65e0.jpg


Psu and ssd mounted. Yes, it's secured by a shoestring. The psu was a pressfit so not worried but i think it looks good.
Psuinteltestfit_zpsce9e2300.jpg


Next update more of the integrated rollcage for MB and GPU! Here its only in mdf, when its finished it will be out of aluminum
Rollcage_zps1711c75d.jpg


Alex
 
Last edited:

I want that garage! I'd never leave!

Nice idea for a mod mate, in what way are you going to have the motherboard visible? Is it through the windows of the Humvee?

Never mind the above question, just noticed that you have it on the back of the Humvee, nice idea :).
 
Thx guys! Appreciate all the comments. The garage is nice and warm now when its insulated :) Fits two cars but then not much room for modding :)



Did a test fit with the mdf rollcage. I/o panel fits quite good but think i will lower it another mm into the frame to get the whole motherboard a bit closer to the panel.
Rollcagemockup_zpsba1ba88c.jpg


The hummer had very large hole after i removed the weapons, decided to make a cover for it and install a fan there instead. Milled out of acrylic and will be painted a bit later. Still has a small hole for a on/off button but need to have a think about what i want to do with it.
Fancover_zps9e20c1a7.jpg


Cut a slot in the back panel and removed some support material in order to get the motherboard and GPU to fit. Still needs some cleaning up but need to make sure everything fits before i make it look nice.
Hummershellcutout_zps73d93977.jpg


In order to get a flush fit between the GPU and the back panel i made an 2mm aluminum back plate. For some reason i programmed the chamfering around the dvi port a bit wrong so i took too much off. Shouldn't have watched tv while programming :) Will still be good for a test fit
GPUplate_zps4f85267b.jpg


New stickers for the fans. The original strix stickers didn't really fit the build.
Tufgpustickers_zpsd2b60872.jpg


First idea for the Hummer and GPU would be to use plastidip. Everyone seems to be liking it and it looks decent in pictures. So bought a few cans and tried it on the GPU. After trying it twice i decided to use normal paint. It didn't look right, it had quite an uneven surface and it just felt cheap. I guess for a motherboard with lots of components and uneven surfaces its not so noticeable. So here is the final pic of the GPU with normal spray paint.
GPUfinished_zpsd9bcfc69.jpg


Last but not least did decide to have a test run of the components. Have had the motherboard for quite some time but hadn't gotten around to test it. Have never gotten a dead mb so wasn't so worried. All worked fine except the gpu, in the end it needed a shielded pcie riser from 3m, tried a few different ebay cables but non of them worked. The 3M ones are expensive but seems to be bulletproof.
Testsetup_zps31173f4e.jpg
 
That hole in to top looks made for a USB socket :).

I really like those 3M PCIE riser cables, my next build has got to use them!
 
Thx guys! I think the reference cooler would still look great in white! It's def worth a try! That could work Mysterae! Although the radiator might get in the way :(
Back with more progress.

The bracket for the Radiator/roof mount
Radiatormount_zpsa893dd3d.jpg


Part of the rollcage, getting a hang of the mill now, getting great surface finish without the need for sanding
Rollcageside_zps7d21efb1.jpg


All parts of the rollcage assembled, seems to be very stable.
Rollcageassemnly1_zps373a2ae2.jpg


Quick test assembly with the motherboard.
Rollcageassemnly2_zps9a62bf39.jpg


Some support brackets for the GPU
GPUsupport_zps47182527.jpg


As always there is something you don't plan for. Had to change one of the sides to make space for the PCI-e riser.
Rollcageassemnly4_zpsf716f013.jpg


Decided to powedercoat the black bits and the white is just normal spray paint. Think the back bit will look better together with the hummer once its painted.
MBtestfit_zpsf6966d8a.jpg


Time for some primer!
Hummerprimer1_zps8a1e8872.jpg

Hummerprimerdone_zps4ea7dd6e.jpg

And some white paint!
Hummerwhite_zpsf2dddc7f.jpg

Had to see how it looks together with the wheels, still missing bits and doing the windows,
Hummerwhitetestfit_zps094d1714.jpg


More coming soon!
 
Thx guys! The board will be fully seen!


Back with another update,

Painted the radiator/roof mount. decided for black, there's quite a lot of white already :)
Radsupportpainted_zps4ac94093.jpg


The nepton cooler with the mount fitted
DSC_0027_zpsb4399aba.jpg


rotated the logo so it's the right way, not really necessary but i do like it when the text is not upside down :)
neptonmod_zps6a90a1b4.jpg


A quick test if everything aligns. Seems pretty dead on :)
Testfitmb_zps139743e0.jpg


Started adding stickers to the car. S/N 0052 is the serial number on the board. Also installed the lights with leds and cabling. Now they light up when the computer is running. Added a switch though so i can turn them of if they are too powerful.
DSC_0009_zps8e3f48e6.jpg


Spent a long time getting the red stickers cut. Seems like cutting a perfectly round circle is a lot harder than i anticipated :D
DSC_0012_zps3f59ffb2.jpg


One side complete
DSC_0006_zpsbf5e2844.jpg


Lights installed!
DSC_0004_zpse7593327.jpg


Top fan fitted! Slight bend in the roof but if i tighten the screws a bit more i should get rid of the tiny gap. Also did all the windows.
DSC_0035_zps8bf0ad07.jpg


Final photos in the next update! A little sneak preview :)
DSC_0047-Copy_zps8ab88eb4.jpg
 
Back
Top