Rare problem?

[wtf1337]

Hello.

I am having some problem's:

----------------------------------------------------------------

CPU

Intel® Core™ i5-2500K

Motherboard

ASUS P8Z68-V PRO/GEN3

Graphics Card

Sapphire Radeon HD 5870 1GB

Memory

Kingston DDR3 HyperX 1600MHz 8GB

650w psu corsair

Os: windows 7 ultimate 64 bit.

-----------------------------------------------------------

One day after updating the bios i was going to bead and shutting down my rig and then the screen just go black? i can hear the hdd spin down but the fans are still going hard.

This hapens every time i shut down the computer, restart works fine.

What i have tryed: reinstalling, linux ubuntu works. but not windows.

It seems like it hapens after installing sp1?

Also tryed safe boot, another hdd. taking out the ram. gpu++

Can you guys help me?

Kind regards.

 

[Vicey]

[font=Verdana, sans-serif, FreeSans]One day after updating the bios[/font]

I'd recommend clearing the CMOS on the board and having everything back to default settings and see if that solves the problem.

 

[wtf1337]

I'd recommend clearing the CMOS on the board and having everything back to default settings and see if that solves the problem.

Sorry forgot to say that i have done that

But i was trying to revert to the old bios but the gui said that it was to old?

 

[yassarikhan786]

Do a system restore to a point before installing sp1 and check if that helps.

 

[wtf1337]

Can't find any dates to restore from..

 

[TheOneHalf]

heh I can not even start my pc it just keeps rebooting the screen stays black and nothing works.....

aparently after clearing cmos and doing it agian it works but seriously this was annoying...

 

[yassarikhan786]

So is everything back to normal now?

 

[SmoulderingCircuits]

Just unplug the power supply for 60 - 90 seconds then plug it back in and everything should be fine. For some reason the fan controller software is still live in your ram even after shutdown. This worked for me.

 

[SieB]

Also disable PPL voltage in the BIOS it was one of the problems with the P67 P8P67 PRO as well and disabling PPL voltage solved it.

 

[TheOneHalf]

So is everything back to normal now?

for me it is fortunatly

 

[wtf1337]

Sorry guys and girls.. for not doing an update.

I still having the problem after turinig off ppl.

Can you help me out here

?

 

[Polo]

What was the last thing you installed prior to this happening ? or is it just sp1 ? do you have sytem restore turned off as windows normally would create a system restore prior to updating... i would scan with maleware bytes but it does sound like a hardware issue, as the fan speed shouldn't change once you have a profile saved.

 

[Big WigglyStyle]

plug your fans into molex, problem solved

 

[wtf1337]

Are you shure that this is a fix? It is going to get daam noisy here now :=)