D deathwish New member May 13, 2007 #1 recently i have been getting system restarts so i used pcwizzard to check the power supply rails i have set the cpu to 1.35v in the bios reading were taken not under load do you think that the program is reading the values incorrectly, or the power supply's on its way out
recently i have been getting system restarts so i used pcwizzard to check the power supply rails i have set the cpu to 1.35v in the bios reading were taken not under load do you think that the program is reading the values incorrectly, or the power supply's on its way out
L llwyd New member May 13, 2007 #2 Are you able to get your hands on a multimeter? even if you have to buy one, it's a worthwhile investment
Are you able to get your hands on a multimeter? even if you have to buy one, it's a worthwhile investment
R Raging New member May 13, 2007 #3 the 12v looks a bit low,see what other programs say like speedfan,sandra etc Raging
H Hyper New member May 13, 2007 #4 As Raging has already pointed out the 12v rail does seem a little low. If your PSU does blow up I wont be surprized as the Hiper 580w Modular units are well known for it. Although mine is still going strong after 18 months.
As Raging has already pointed out the 12v rail does seem a little low. If your PSU does blow up I wont be surprized as the Hiper 580w Modular units are well known for it. Although mine is still going strong after 18 months.
D deathwish New member May 13, 2007 #5 had the psu for a long time so if it is it is on its way out then its no biggy sandra is giveing me a warning too saying cpu is under powered
had the psu for a long time so if it is it is on its way out then its no biggy sandra is giveing me a warning too saying cpu is under powered
B blackoper New member May 16, 2007 #8 you can always try swapping in another psu and see if the problem goes away.
