PCPower&Cooling 510 SLI Probs...

[Animal]

Well im guessing its this cause today i put my new PSU in and ever since my CSS game keeps crashing during game play

Thing is when running the same setup on my Antec TC 550 i had no probs...

Any Ideas???

 

[Wingz]

do you have a multimeter to measure the +12, +5 and +3.3 lines of the psu?

 

[Animal]

Well if i read them from bios there all fine...

 

[Firelord]

Ignore the BIOS and get a multi meter....

I still get spurious readings from the BIOS but a quick check on the multi soon confirms it

 

[fatty]

I got mine up and running last night and it seems to run a treat??

 

[Phil Stanbridge]

Mines running ok now too - although had a few worries I have to say; but its the DFI mobo more than anything else causing the problems. Updated the bios to the latest beta (unofficial) and its as solid as a rock.

Will start a new thread reference results attained with new kit.

 

[scorchio]

I am having trouble with stability at the mo.Last night eveything was great runing perfect since then my pc froze,re-started wouldn't boot tried reinstalling wouldn't do that either changed drives taken a card out.Only when i changed my gskill to my old corsair did it work now when i try to overclock just a little my machine shuts down on it's own and if i put the gskill in it won't boot.So i have ordered a new Enermax 680w sli power supply fingers crossed its that and not the mobo.Maverick-sg1 flashed his bios and he's having all sorts of trouble.What bios did you use Phil?

 

[fatty]

Best bios to use is still 218 thats what I am using the board is very querky what timmings and volts did you have on your gskill as if there is not enough volts the machine will go into like a boot loop up to 275 fsb I use 2.5v for above I need 2.8v so at the moment I am running 290 x 11 2.8v on the mem and 1.7v on my cpu thats 1meg pi and 3dmark and game stable

 

[imported_Diesel]

I've had problems with my 510 TurboCool deluxe in that it seems to switch my PC off when it is heavily overclocked combined with low ambient temperatures. I have tried to contact PCP&C to talk about this but they are ignoring my e-mails. I don't want to RMA through Phil again because I don't wantto mess him about.

On top of that, the top is missing off the +5v pot, it's just as well it is set (stuck - lol) at 5.07volts.