overclocking 970 qpi/voltage

[clutchuser]

here are my initial bios settings

cpu x15

bclock 133

dram 800

qpi 1.2v

dram v auto

uncore 2400

cstates off

speedstep off

nic/1394/sata6 off

i started increasing the bclock and adjusting the qpi voltage to find my limit, that happens to be about 185 bclock and 1.375v qpi. can i apply more voltage, any other options to look at before i call it done. or am i doing this all backwards. i've run prime for 30 min with these setting and everything is ok so far.

 

[clutchuser]

I ended up with a nice stable 4ghz..(200 x20) dram @ 1600.....UCLK @ 2400 vcore 1.35

Are temps in the upper 60s lower 70s ok at full load. is this ok for 24/7 use.

memtest 7 hours

prime95 8hrs

and folding for 24 hours

 

[tinytomlogan]

QPI for 2000MHZ ram will be up to about 1.55v For my silly tight 2000mhz 12GB kit I need 1.56v