New idle & load temps are nice!

[FragTek]

Well I figured before I get my 3700+ Diego I'd run my ram @ 2-2-2-5 timings at a lower clock speed... I took it down to 210x9 and set the timings... Once I loaded back into windows my temps were the shiznit hehe

Idle: 21*c

Load: 27*c

This Winnie doesn't put out shit for heat when there's no voltage to it, hehe.

 

[balilu]

nice temps

 

[FarFarAway]

Well I figured before I get my 3700+ Diego I'd run my ram @ 2-2-2-5 timings at a lower clock speed... I took it down to 210x9 and set the timings... Once I loaded back into windows my temps were the shiznit hehe

Idle: 21*c

Load: 27*c

This Winnie doesn't put out shit for heat when there's no voltage to it, hehe.

Nice - got the XP 120 in but temps are still quite high....35-7idle and 45/6 full load

 

[FalconFX]

Nice temps there. You are watercooling so its not that big of a Surprise isnt it ?

 

[muffin]

Nice - got the XP 120 in but temps are still quite high....35-7idle and 45/6 full load

You want new BIOS dude, mine was 40idle before I flashed to a BIOS I was recommended. Now around 28C idle

Also got up to 230x10 at stock vcore, confuseds about stablility though. Everything seems to be fine, Super PI gives an error, it don't crash or freeze, just comes up with a "Super PI has encounted and internal errror and needs to close"

 

[FragTek]

You want new BIOS dude, mine was 40idle before I flashed to a BIOS I was recommended. Now around 28C idle

Also got up to 230x10 at stock vcore, confuseds about stablility though. Everything seems to be fine, Super PI gives an error, it don't crash or freeze, just comes up with a "Super PI has encounted and internal errror and needs to close"

Nice man!

@FalconFX: No not a big surprise, I've just never run it at stock before I'm sure I'd be sub 20*c easily if I cut down the vcore to 1.3 in clockgen.

 

[FarFarAway]

Cool...keep it going muffman...I've got to 255 x 10 at the mo with vcore @ 1.7v and running DDR @ 100....time to do that memory part now methinks!!

I stopped....raising vcore no more and this is my stable OC without the memory sorted yet!

 

[FragTek]

Cool...keep it going muffman...I've got to 255 x 10 at the mo with vcore @ 1.7v and running DDR @ 100....time to do that memory part now methinks!!

I stopped....raising vcore no more and this is my stable OC without the memory sorted yet!

Cool man!

 

[bloodthirst]

man those temps are heeps good wish mine where like that haha

 

[FragTek]

man those temps are heeps good wish mine where like that haha

Thx! All it takes is some watercooling goodness

 

[bloodthirst]

yeah im looking at saving up for a watercooling setup

 

[FragTek]

yeah im looking at saving up for a watercooling setup

Definately man, it's worth it!

I might have a few of my wc pieces up for sale soon Well, only the cpu block really, lol.

When I get my Vapochill i'm gonna keep my vid card and chipset on water.

 

[bloodthirst]

this might be a stupid question but im on computer like most of the day lol and its also on most of the time like its rarely off, is that allright to have to watercooling on all the time im guessing it is :yumyum:

 

[FragTek]

this might be a stupid question but im on computer like most of the day lol and its also on most of the time like its rarely off, is that allright to have to watercooling on all the time im guessing it is :yumyum:

Of course!

Mines on 24/7

 

[bloodthirst]

ahh thats good , if the tubes carying the coolent are like rubber wouldnt they liek corrode and leak

 

[FragTek]

ahh thats good , if the tubes carying the coolent are like rubber wouldnt they liek corrode and leak

They're PVC and corrosion resistant lab quality tubes Plus you use distilled water and non corrosive antifreeze/additives.

 

[bloodthirst]

thats good then, well when i next get payed or when i get enough money i might buy a setup

 

[FragTek]

thats good then, well when i next get payed or when i get enough money i might buy a setup

Yes definately look into it.

 

[bloodthirst]

if im only going to WC the cpu and mabye the GPU, where else can i put it hard drive mabye lol im very new to WC

 

[FragTek]

if im only going to WC the cpu and mabye the GPU, where else can i put it hard drive mabye lol im very new to WC

Chipset can be cooled as well, and so can the hard drive... HD watercoolers are pretty useless though, I wouldnt recommend it. Go for your key components which would be CPU, GPU, and chipset.