My new Prometeia/water/tec hybrid :)

[alansd]

Having problems posting more than 1 pic per post which could do with sorting considering this is a gallery section so heres the link to the pics of my new computer build:

http://www.betas-blockers.com/html/...c&t=1277&sid=bc007cad9f47b37b90e09a947e0bbc5b

 

[ZaX]

Cant see nothing on that link mate.

 

[alansd]

Ok i'l try posting them again 1 at a time if neccessary

 

[alansd]

set 2

 

[alansd]

set 3

 

[alansd]

set 4

 

[Thickbrit]

How do you get to anything in there ?Don't be offended,but its a little messy and can't be doing the airflow any good and that cable tie round the bottom of the thermal bus concerns me tother than that,good job,you should be pleased.I haven't seen that case on a prom before either.

 

[alansd]

How do you get to anything in there ?Don't be offended,but its a little messy and can't be doing the airflow any good and that cable tie round the bottom of the thermal bus concerns me tother than that,good job,you should be pleased.I haven't seen that case on a prom before either.

Theres a lot of components in their, but I wanted to get most of them in the case to make it tidy on the outside. From the outside looking in, it looks quite tidy most of the untidy bits are conceiled from the outside. Some of the cable and tubing was intentionally placed to get maximum uv effect which unfortunately doesn't come off too good on the camera. Air flow isnt an issue it just looks a little more cluttered than it really is in the picture. Also the side window is a grill which allows a lot of air into the case. The northbridge has two fans feeding air from the grill blowing on it. While the two main heat sources sit underneath cooling systems which exhaust outside the case. The gpu is under the peltier cooled by water cooling system where most of the heat is exhausted by rear radiator. The CPU sits under the prometeia. My only main criticism of my own build is that the meanwell psu generates a bit of heat inside the case which is not efficiently exhausted out of the case.

The hardware specs are detailed in my post in the mach ii section of the forum. Interesting to add to that is the weight of the computer which comes in at 40kg. Also although I haven't measured the power consumption, i'm estimating it approaches a KW at full load which means the computer doubles quite effectively as a room heater. lol my room does get quite warm when this has been running for a while.

 

[imported_Tim]

It looks kind of messy to me...

Maybe clean your rig (a lot of dust..) and orden your cables...

 

[HARRY]

i agree its messy .BUT if ya clean it up itl look very funky nice work mate