Metallic Red PC60 Plus

[Phil Stanbridge]

Here's my baby. A metallic red PC60 Plus modified for the PA160. It's running a X2 4800 @ 35 degrees idle @ 2.7ghz virtually silent. It's a 24/7 system and has been totally reliable to date. She doesnt get switched off.

 

[maverik-sg1]

Loving the work u done there mate - great stuff, temps are really good, I'm sure there's 2.8Ghz in there though

On stock volts I could push up to 235Mhz on phase, so 230 should be easily reached - not that you need the power, but if you were to switch to a PA120.2, could be a great option for your customers.

Don't forget to update the pics as previously discussed in other threads.

Mav

 

[fatty]

Very sweet mate

 

[Master_G]

I LOVE that colour, great custom window too, subtle but looks great, i would just change the fan grills to EPUK ones and that would be it.

How do you rate the PC60 Plus phil as a case to work with, i was thinking of using one for a project this summer but wasnt sure.

G

 

[PHILIP1193]

phil mind me asking what happened to that innovtek controller, if u still ahve it i may take it off u as logn as teh red is same as mine and also maybe some new grills on yr case woudl be nice - poss ep-uk ones woudl b a good start?

phil

 

[Phil Stanbridge]

I LOVE that colour, great custom window too, subtle but looks great, i would just change the fan grills to EPUK ones and that would be it.

How do you rate the PC60 Plus phil as a case to work with, i was thinking of using one for a project this summer but wasnt sure.

G

Generally the cases are very nice to work with - however the installation of the PA160 could have been easier.

 

[Phil Stanbridge]

phil mind me asking what happened to that innovtek controller, if u still ahve it i may take it off u as logn as teh red is same as mine and also maybe some new grills on yr case woudl be nice - poss ep-uk ones woudl b a good start?

phil

The fan-o-matic Pro was overkill in a machine of this size/spec, plus the model I have here needs RMA'ing as there is a fault with it.

I will be selling this little system in due course, and will of course stick the obligatory EP-UK grills on it

 

[unreal]

So thats 2x 120mm blowholes in top?

Whats the spec of water setup?

 

[R1_155]

It is a superb looking machine :B

Out of intrest when did you build it?

 

[Phil Stanbridge]

So thats 2x 120mm blowholes in top?

Whats the spec of water setup?

They are for separate 120 fans or another rad. But in my situation just for show

PA160

shroud

Vantec Stealth 120

Tygon 7/16

C-Systems Mag pump

Swifty Storm G4 (original)

NV78

Externally mounted 6" tuberes

 

[Phil Stanbridge]

It is a superb looking machine :B

Out of intrest when did you build it?

Few months ago now, its used 24/7 in most cases for work.

 

[Bradmax57]

Its one sweet looking machine